FS: VQ35HR Nitrous adapters, 380RS gas pedal, Cobb AP 07-08 350Z
05-20-2015, 04:28 PM
#1
VQ35HR Nitrous adapters, 380RS gas pedal, Cobb AP 07-08 350Z
Have some of the stuff I removed from the car before sale.
380 RS gas pedal, used, perfect shape - $30 shipped -SOLD
Cobb AP for HR engine 350Z - this was an early V2, I had the screen die and I shipped it to cobb and it got upgraded to the newer style and cable, cost me almost $200. So it's an older serial # but the entire unit is only about 6 months old, the only part they re-use was the housing according to the tech guys at Cobb. I can leave my N/A and Nitrous maps on it if the buyer wants them, or I can remove them and just ship with the standard Cobb maps.
$380 shipped - SOLD
HR nitrous adapter setup. This is a pair of custom made spacers for behind the throttle bodies, and a spacer for the fuel rail fitting, so you don't have to drill or tap anything on your vehicle. Just unbolt your throttle bodies and install these spacers with the nozzles in them, unbolt your fuel fitting and put this piece in and hook up the line. Super clean and easy nitrous installation on any HR engine, might work on a VHR if the TB flanges are the same, I have never tried it.
The adapters are tapped for 1/16th NPT, it was a NOS brand kit. If you need it drilled for 1/8th NPT nozzles instead I can do that before shipping, or add them on the other side and supply plugs for both. Just ask and we can work something out. The fuel fitting is tapped for 1/8" NPT and will come with the 90 degree adapter fitting to -4AN that's installed on it in the pics.
$220 shipped.
PM here, email to Italianjoe1@hotmail.com, or call/text to 305-975-4570 for the fastest reply.
Thanks
Joe
380 RS gas pedal, used, perfect shape - $30 shipped -SOLD
Cobb AP for HR engine 350Z - this was an early V2, I had the screen die and I shipped it to cobb and it got upgraded to the newer style and cable, cost me almost $200. So it's an older serial # but the entire unit is only about 6 months old, the only part they re-use was the housing according to the tech guys at Cobb. I can leave my N/A and Nitrous maps on it if the buyer wants them, or I can remove them and just ship with the standard Cobb maps.
$380 shipped - SOLD
HR nitrous adapter setup. This is a pair of custom made spacers for behind the throttle bodies, and a spacer for the fuel rail fitting, so you don't have to drill or tap anything on your vehicle. Just unbolt your throttle bodies and install these spacers with the nozzles in them, unbolt your fuel fitting and put this piece in and hook up the line. Super clean and easy nitrous installation on any HR engine, might work on a VHR if the TB flanges are the same, I have never tried it.
The adapters are tapped for 1/16th NPT, it was a NOS brand kit. If you need it drilled for 1/8th NPT nozzles instead I can do that before shipping, or add them on the other side and supply plugs for both. Just ask and we can work something out. The fuel fitting is tapped for 1/8" NPT and will come with the 90 degree adapter fitting to -4AN that's installed on it in the pics.
$220 shipped.
PM here, email to Italianjoe1@hotmail.com, or call/text to 305-975-4570 for the fastest reply.
Thanks
Joe
Last edited by Italianjoe1; 05-22-2015 at 04:19 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
NOLAGG
Misc.
6
09-28-2015 04:14 PM