VQ35DE engine build - Turbo Sandrail
#2
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
Thought I would share my build here. I ran a stock motor for 10 years with boost and finally bent a rod. Building a simple Wiseco/Eagle motor. Not many good engine build threads for this motor so thought I would share over here.
You will have to become a member on Glamisdunes.com to see the complete thread and photos. Includes machine shop video you normally don't get to see.
http://www.glamisdunes.com/invision/...gine-rebuild/&
You will have to become a member on Glamisdunes.com to see the complete thread and photos. Includes machine shop video you normally don't get to see.
http://www.glamisdunes.com/invision/...gine-rebuild/&
#7
Registered User
iTrader: (9)
Well this was a waste of time.
It's not hard to post a YouTube link or copy paste the details guy. I can understand not wanting to post all the picture links (but damn you could of done like I don't know, 1 or 2 of the finished product?), and putting it behind a registration wall is just F you territory, might as well include ad block detection while your at it.
It's not hard to post a YouTube link or copy paste the details guy. I can understand not wanting to post all the picture links (but damn you could of done like I don't know, 1 or 2 of the finished product?), and putting it behind a registration wall is just F you territory, might as well include ad block detection while your at it.
Last edited by Juztin; 02-18-2017 at 07:57 PM. Reason: lazy, just like this Thread OP
The following users liked this post:
Cux350z (02-19-2017)