Woo! MREV+ and 5/16 Spacer on my '06!
08-16-2006, 02:23 PM
#1
Registered User
Thread Starter
iTrader: (3)
Join Date: Mar 2006
Location: Malibu, California
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
Woo! MREV+ and 5/16 Spacer on my '06!
Just got my MREV+ and 5/16 spacer installed on my '06 (rev-up).
Holy crap, much more of an improvement than high-flow cats and my popcharger. Amazingness. Not like getting a turbo or anything, but low to mid-range I have quite a bit of a kick. Every gear feels stronger. Not to mention the sound at WOT is deeper, more of a growl. Great mod! Too bad my local shop charged me $230 to install them.. :'(
They live literally next to my house though. Too convenient.
Anyway, anyone with a rev-up engine who was wondering if those were good mods, the answer is - yes!
Holy crap, much more of an improvement than high-flow cats and my popcharger. Amazingness. Not like getting a turbo or anything, but low to mid-range I have quite a bit of a kick. Every gear feels stronger. Not to mention the sound at WOT is deeper, more of a growl. Great mod! Too bad my local shop charged me $230 to install them.. :'(
They live literally next to my house though. Too convenient.
Anyway, anyone with a rev-up engine who was wondering if those were good mods, the answer is - yes!
08-16-2006, 04:18 PM
#4
Registered User
iTrader: (23)
Join Date: Jul 2006
Location: Jacksonville, FL
Posts: 2,001
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by VegasZ35TH
I was thinking about adding that mod to my rev-up but of course I did the turbos route first. 
08-16-2006, 04:35 PM
#5
Registered User
Join Date: Mar 2004
Location: SoCal
Posts: 785
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dingobiatch
Just got my MREV+ and 5/16 spacer installed on my '06 (rev-up).
Holy crap, much more of an improvement than high-flow cats and my popcharger. Amazingness. Not like getting a turbo or anything, but low to mid-range I have quite a bit of a kick. Every gear feels stronger. Not to mention the sound at WOT is deeper, more of a growl. Great mod! Too bad my local shop charged me $230 to install them.. :'(
They live literally next to my house though. Too convenient.
Anyway, anyone with a rev-up engine who was wondering if those were good mods, the answer is - yes!
Holy crap, much more of an improvement than high-flow cats and my popcharger. Amazingness. Not like getting a turbo or anything, but low to mid-range I have quite a bit of a kick. Every gear feels stronger. Not to mention the sound at WOT is deeper, more of a growl. Great mod! Too bad my local shop charged me $230 to install them.. :'(
They live literally next to my house though. Too convenient.
Anyway, anyone with a rev-up engine who was wondering if those were good mods, the answer is - yes!
I am really anxious to see how well these mods do because you have almost the exact same setup I want to add to my 06 MB Track model --- I have had it about a month now and want to decide already lol
Trending Topics
08-16-2006, 07:11 PM
#8
Originally Posted by VegasZ35TH
I was thinking about adding that mod to my rev-up but of course I did the turbos route first.
I'll give you a $250 rebate if you can install the MREV2 and 5/16" spacer on the dyno and post your results here.
Tony
08-16-2006, 07:38 PM
#10
Registered User
iTrader: (1)
Join Date: Aug 2006
Location: Austin, TX
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Thank you dingobiatch for sharing...I have been wanting to do this to my 06 so I am happy to hear that you had great results. Butt meter is great, but the dyno is better. Ha Ha Ha!
Thanks Again,
-J
Thanks Again,
-J
08-16-2006, 08:27 PM
#13
Registered User
Thread Starter
iTrader: (3)
Join Date: Mar 2006
Location: Malibu, California
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
Heh, I don't know if I can drop $100 on a dyno. I know, I know, so much money into N/A mods, I should be able to afford $100. I just spent way too much money this last month.
Unless a few people interested want to paypal me $20 each or something, so I only have to pay $20-ish for a dyno. :-P (Actually I'm dead serious, but I doubt anyone will care enough hehe)
Unless a few people interested want to paypal me $20 each or something, so I only have to pay $20-ish for a dyno. :-P (Actually I'm dead serious, but I doubt anyone will care enough hehe)
08-16-2006, 11:06 PM
#15
Originally Posted by dingobiatch
Heh, I don't know if I can drop $100 on a dyno. I know, I know, so much money into N/A mods, I should be able to afford $100. I just spent way too much money this last month.
Unless a few people interested want to paypal me $20 each or something, so I only have to pay $20-ish for a dyno. :-P (Actually I'm dead serious, but I doubt anyone will care enough hehe)
Unless a few people interested want to paypal me $20 each or something, so I only have to pay $20-ish for a dyno. :-P (Actually I'm dead serious, but I doubt anyone will care enough hehe)
08-16-2006, 11:32 PM
#16
Retired Admin
iTrader: (95)
Did you get the MREV+ or MREV2? (just in case you had a typo, I'm asking again)
If you're going to dyno, you'd have to take off the MREV+ (or 2) and spacer combo, dyno it with 3 wideband runs, put the combo back on, and redyno with 3 wideband runs to truly see how much you've gained on your own specific car. I would also like to see this as well, even though I don't have a revup.
If you're going to dyno, you'd have to take off the MREV+ (or 2) and spacer combo, dyno it with 3 wideband runs, put the combo back on, and redyno with 3 wideband runs to truly see how much you've gained on your own specific car. I would also like to see this as well, even though I don't have a revup.
08-16-2006, 11:36 PM
#17
Registered User
iTrader: (1)
Join Date: Oct 2005
Location: Las Vegas
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Hydrazine
I've been waiting to see this thing dynod on a TURBO REVUP for a long time.
I'll give you a $250 rebate if you can install the MREV2 and 5/16" spacer on the dyno and post your results here.
Tony
I'll give you a $250 rebate if you can install the MREV2 and 5/16" spacer on the dyno and post your results here.
Tony
08-17-2006, 05:34 AM
#18
Originally Posted by Hydrazine
I've been waiting to see this thing dynod on a TURBO REVUP for a long time.
I'll give you a $250 rebate if you can install the MREV2 and 5/16" spacer on the dyno and post your results here.
Tony
I'll give you a $250 rebate if you can install the MREV2 and 5/16" spacer on the dyno and post your results here.
Tony
