When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Quick Q for you homies slammed on 19's. When i was slammed on 18's my UCA's didn't hit my engine bay at all. I didn't change anything on my car at all, but put 19's on... Now it seems the UCA's are hitting... What gives?
Thanks guys. Here are a couple pics of my new set up I installed Saturday. Stupid Kinetix front camber arms were pretty much useless so I am switching to SPL to get a little more camber in front and dial everything in the way I want it. Had to raise the car a little bit so I don't rip the front fenders off. Rear fitment is spot on how I wanted it.
Meister S1R gloss black barrels with Gold centers. 19x10.5 -10 R disk, 19x11.5 +0 O disk. 235.35 and 275.30 Achilles ATR Sports.
Both sets compliment your z very well. Big_C what wheel/tire specs did you run on the cr kai's and s1r's?
I have 20x10.5 -5 and 20x11.5 -7 ag function f121's sitting in my room cause i'm having a hard time finding the perfect set of tires for them. I've looked into all brands online and locally and can't seem to find them. I've looked at different setups and decided on 245/30/20 for the fronts and 265/30/20 for the rears but 265/30/20 is a hard tire to find. I'm trying to find all four in the same brand. I wanted hankook v12's but no luck there with the 265. So I tried going down a size with the width to 255 but when compared to the fronts, it's too much of a stretch difference. Don't know if it'll look right. If I go up a size in profile to 35 i'll still have the same problem. What size would you or anyone reading this recommend?
What up stretch fam! Haven't driven the Z in over a year but finally pulled it out of retirement. I had it on blocks for that time so it's sitting a bit higher than normal.
Hello! Seeing all the stanced guys posting here i figure atleast one of you guys could help me.
I just ordered stance true type coilovers with spc front camber arms and spl rear camber and toe links. What else would i need in order to get the stanced look like all the cars in this thread? Most likely toe bolts right, so i could better correct the toe or are you guys running stock toe bolts?
05-26-2015, 05:03 PM
my roadster 2 by Kyle, on Flickr
