Aggressive Wheels and Stretched Tires....Welcome
New Member
iTrader: (1)
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
The following users liked this post:
jhc (07-31-2015)
Registered User
Where I am at right now
New Member
Registered User
Join Date: Jul 2015
Location: pennsylvania
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Registered User
Registered User
General & Tech Moderator
MY350Z.COM
MY350Z.COM
Not for nothing, but you guys should take a look at what goes into driving safely on that much camber (relatively speaking of course). I don't think you should quantify "a serious build" as something built for a track. There's plenty of other "serious builds" that take just as much time an effort to complete. Plus, they gotta deal with the whole "serious build" nonsense because it's not built to go faster.
New Member
iTrader: (15)
Registered User
iTrader: (8)
Registered User
Thank you, it means a lot. I really like the gold look as well lol
Hey guys,
I was wondering if these wheels will fit on a 350z without rolled or pulled fenders. The specs are 18x10, front offset is -15 (FR) and rear is 0 (O disk). The tires are 225/40 front and 235/40 rear. Will they rub or poke out to much? Do I have to add camber? The z has a basic coilover setup with camber plates. Help will be greatly appreciated!
I was wondering if these wheels will fit on a 350z without rolled or pulled fenders. The specs are 18x10, front offset is -15 (FR) and rear is 0 (O disk). The tires are 225/40 front and 235/40 rear. Will they rub or poke out to much? Do I have to add camber? The z has a basic coilover setup with camber plates. Help will be greatly appreciated!
Last edited by jameswouldgo; 08-05-2015 at 02:45 PM.
Anyone care to help? I bought some varrstoen es6's 19x11 +15 all around and plan on running 15mm spacers in the front and 20mm or maybe 25mm in the back. I am looking for this look but probably a little more camber in the front and less camber than he has in the rears since my offsets are alright. Any opinions on how itll look, planning to slam it abit more when i get the wheels, iam running on stance coilovers, spc front camber arms, spl camber/toe arms for the rears. Any recommendations on tire size, was thinking 265/30 all around? Would i need to pull my rears abit?
Last edited by Shmoke; 08-07-2015 at 04:35 AM.
Registered User
Anyone care to help? I bought some varrstoen es6's 19x11 +15 all around and plan on running 15mm spacers in the front and 20mm or maybe 25mm in the back. I am looking for this look but probably a little more camber in the front and less camber than he has in the rears since my offsets are alright. Any opinions on how itll look, planning to slam it abit more when i get the wheels, iam running on stance coilovers, spc front camber arms, spl camber/toe arms for the rears. Any recommendations on tire size, was thinking 265/30 all around? Would i need to pull my rears abit?
I'm thinking you'll need a roll and pull. I'm 18x12 -4 on a 255/40. Running a 18x10 -3 on a 215/40 up front. Rolled and pulled all 4 corners. Didn't intend to run that much camber in the rear. Planning on doing a 265/35 so I can dumb down the camber and like everyone said, planning on doing Megan front UCA's. I'm Also have stance coilovers, but took out the helpers in the rear, and I'm running swift springs. So depending on how low you wanna go and how stiff you wanna be with that poke might be something to think about too. Good luck to you bud!
Last edited by Greener; 08-07-2015 at 05:47 AM.
I'm thinking you'll need a roll and pull. I'm 18x12 -4 on a 255/40. Running a 18x10 -3 on a 215/40 up front. Rolled and pulled all 4 corners. Didn't intend to run that much camber in the rear. Planning on doing a 265/35 so I can dumb down the camber and like everyone said, planning on doing Megan front UCA's. I'm Also have stance coilovers, but took out the helpers in the rear, and I'm running swift springs. So depending on how low you wanna go and how stiff you wanna be with that poke might be something to think about too. Good luck to you bud!
Registered User
iTrader: (3)
Anyone care to help? I bought some varrstoen es6's 19x11 +15 all around and plan on running 15mm spacers in the front and 20mm or maybe 25mm in the back. I am looking for this look but probably a little more camber in the front and less camber than he has in the rears since my offsets are alright. Any opinions on how itll look, planning to slam it abit more when i get the wheels, iam running on stance coilovers, spc front camber arms, spl camber/toe arms for the rears. Any recommendations on tire size, was thinking 265/30 all around? Would i need to pull my rears abit?
Motorfest 2015 by Josh Mawdesley, on Flickr
Motorfest 2015 by Josh Mawdesley, on Flickr
Last edited by irishguy0224; 08-07-2015 at 03:19 PM.