Making an Old Z…. Like New Again??!!
Hey guys. Really need your input.
So I have a 2004 350Z Roadster (6 speed) _2nd owner _
Car has 71k original miles on it.
Engine and Transmission are healthy.
By: Ryan-350Z | August 12, 2023
Hey guys. Really need your input.
So I have a 2004 350Z Roadster (6 speed) _2nd owner _
Car has 71k original miles on it.
Engine and Transmission are healthy.
By: Ryan-350Z | August 12, 2023
Hello! So I bought a set of wheel spacers to adapt the 5×114 to 5×120 for a set of wheels that I just bought, and once I got the spacers I tried to test fit them, and they fit fine, but the hub for…
By: Tech Territory | August 11, 2023
current issues. while driving down the highway heard a noise comparable to a snapping and experienced a loss of power. while going to a safe place to park my RPMS fluctuated to a point higher than…
By: Parker. Z | August 10, 2023
What is the normal manifold vacuum pull on the VQ35HR engine?
I am going to cap off the vac port and install an electric vacuum pump and I want it to be lower vacuum than stock for a stiffer pedal…
By: Bmsluite | August 7, 2023
I installed new axles and wheel bearings and ever since then the z bounces a lot in the rear and shakes a lot. It did throw a slip warning once while driving straight. I am a bit confused because I…
By: omarbar2400 | August 6, 2023
Son bought a 2003 350z. The dash is lit as stated above and the brakes are soft. If you push them once then let off and hit them a second time they are better to stop. I’ve been researching a bit and…
By: BDS | August 5, 2023
I’ve never had this happen to my Z before but I have a 2004 350z enthusiast. I was on my break at work and was just sitting in my car with it on for about 15min w the AC on, and then I rolled the…
By: Grace.350z | August 5, 2023