Finally got Pics of Car and Stats after FI etc.
Thread Starter
Registered User
Joined: Sep 2005
Posts: 668
Likes: 0
From: Houston, Texas
Finally got Pics of Car and Stats after FI etc.
Trending Topics
Thread Starter
Registered User
Joined: Sep 2005
Posts: 668
Likes: 0
From: Houston, Texas
Thanks guys,
I don't know what to tell you on the WHP @ 6 psi. Mark at SGP is beside himself as well. He is really wanting to tear it down later and find out why. I will be going for a full build early '06. Look at the pics man, it's 421whp and I'm telling you the controler is almost all the way down and the gauge never goes over 6 psi.
I don't know what to tell you on the WHP @ 6 psi. Mark at SGP is beside himself as well. He is really wanting to tear it down later and find out why. I will be going for a full build early '06. Look at the pics man, it's 421whp and I'm telling you the controler is almost all the way down and the gauge never goes over 6 psi.
Thread Starter
Registered User
Joined: Sep 2005
Posts: 668
Likes: 0
From: Houston, Texas
Does anyone know what specs of the new 35th Ann. engine would create these numbers @ 6 psi? I seem to be the only one that has FI'ed one of these new motors. Is it the crank, cams, head, what? SGP is pretty surprised and that is real strange considering their experience. I would like to know what it is before tearing it down...
Thread Starter
Registered User
Joined: Sep 2005
Posts: 668
Likes: 0
From: Houston, Texas
The back sidewall should be 35 not 30. I ordered them wrong. Not good considering they are $300 each. I think if I had 35's on the back it would be fine. I just like the stance. You're right, not feeling it...