Notices
2003-2009 Nissan 350Z

Different color bulbs in front

Thread Tools
 
Search this Thread
 
Old Dec 4, 2005 | 06:19 PM
  #1  
t2dawizang's Avatar
t2dawizang
Thread Starter
Registered User
 
Joined: Sep 2005
Posts: 32
Likes: 0
From: Fairfax, VA
Default Different color bulbs in front

I know the headlight set is different from the other models, but quick question and maybe someone might know. I want to switch out the two orange bulbs, the turning signal and the parking light bulb or whatever (the small one), I know they sell chrome bulbs or something like that, if anyone has already done this to your Z let me know where I can get these bulbs and if there is any directions on how to take off your headlight set because I hear thats what you have to do just to replace bulbs. Let me know thanks...
Reply
Old Dec 4, 2005 | 07:22 PM
  #2  
Netko350Z's Avatar
Netko350Z
Registered User
iTrader: (8)
 
Joined: Dec 2004
Posts: 10,033
Likes: 7
From: Pennsylvania
Default

I am putting in some LED bulbs in the turn signal spots. I hate how the yellow bulbs look.

to get at the bulbs you have to remove the inner fender liner.

There are lots of people that changed the bulbs for LED's you also have to buy the resistors so the lights don't go into "Hyper-flash" mode.


Link to the bulbs I bought...http://www.autolumination.com/

Went with the "tower" LED's for the turn signals and the 5 LED Matrix bulbs for the little marker lights inside the headlamps.
Reply
Old Dec 4, 2005 | 10:20 PM
  #3  
t2dawizang's Avatar
t2dawizang
Thread Starter
Registered User
 
Joined: Sep 2005
Posts: 32
Likes: 0
From: Fairfax, VA
Default

the inner fender lining? under the hood? hey thanks for the reply always looking for advice also when you do replace your bulbs do you mind taking some pics so I can see how big of a difference there is, also do you know if the 06 model is going to be different switching out the bulbs
Reply
Old Dec 5, 2005 | 12:29 PM
  #4  
Netko350Z's Avatar
Netko350Z
Registered User
iTrader: (8)
 
Joined: Dec 2004
Posts: 10,033
Likes: 7
From: Pennsylvania
Default

Inner fender lining (Splash shield). You have to remove the wheel to get at it with out it being a b!tch.

I'll post pics after x-mas. 2 reasons...digital camera and I am on vacation.

06 should be no different that my 04.
Reply
Old Dec 5, 2005 | 04:35 PM
  #5  
t2dawizang's Avatar
t2dawizang
Thread Starter
Registered User
 
Joined: Sep 2005
Posts: 32
Likes: 0
From: Fairfax, VA
Default

you sure removing the entire headlight set isnt easier because thats just some bolts and screws under the hood, or what it looks like? getting behind the lining is such a pain in the butt, I already tried when trying to replace my reflectors.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Obadabot
Maintenance & Repair
16
Jun 18, 2023 11:31 PM
Uriyo_
Exterior & Interior
22
Sep 8, 2021 08:46 AM
sales@czp
Engine
33
Sep 23, 2019 03:30 PM




All times are GMT -8. The time now is 03:30 AM.