Notices
2003-2009 Nissan 350Z

2005 350z shifting problems???

Thread Tools
 
Search this Thread
 
Old 01-06-2006, 06:55 PM
  #1  
lilchief
Registered User
Thread Starter
 
lilchief's Avatar
 
Join Date: Jan 2005
Location: Louisiana
Posts: 171
Likes: 0
Received 0 Likes on 0 Posts
Default 2005 350z shifting problems???

I have read a few threads about ppl having problems shifting smoothly in the 05's especialy to 1sr and 1st to 2nd. I am a 05 Z owner and i had the same problem as well. I took the car to the dealer and told them about the problem and it seems like i have too much play with the clutch. So they readjusted my clutch pedal and i am here to tell you, just doing that made all the difference in the world. I feel like i drive a brand new Z and a much better one at that. Now i almost have no play and it is so much easier to shift with out jerking the car. Whether you racing or just drving normally it is alot smoother to shift throuhgout all the gears. I just wanted to give my 2 cents in since i know there are other owners with that problem.
Old 01-06-2006, 07:02 PM
  #2  
Mike Wazowski
350Z-holic
iTrader: (113)
 
Mike Wazowski's Avatar
 
Join Date: Nov 2004
Location: San Diego 92111
Posts: 22,096
Likes: 0
Received 1 Like on 1 Post
Default

Old 01-06-2006, 07:24 PM
  #3  
bamyi
Registered User
iTrader: (2)
 
bamyi's Avatar
 
Join Date: Aug 2004
Location: Denver, CA
Posts: 3,789
Likes: 0
Received 0 Likes on 0 Posts
Default

wait, explain your jerking problem again. When I shift out of 1st, my car tends to jerk if I don't ride the clutch for a sec or two. Is this similar to your problem?
Old 01-06-2006, 07:40 PM
  #4  
lilchief
Registered User
Thread Starter
 
lilchief's Avatar
 
Join Date: Jan 2005
Location: Louisiana
Posts: 171
Likes: 0
Received 0 Likes on 0 Posts
Default

I do think so, when i tried going from 1st to 2nd i would have to hold teh clutch pedal a bit longer ride it for a bit so the car would not jerk.

Originally Posted by bamyi
wait, explain your jerking problem again. When I shift out of 1st, my car tends to jerk if I don't ride the clutch for a sec or two. Is this similar to your problem?
Old 01-06-2006, 07:50 PM
  #5  
Dubai
Registered User
iTrader: (15)
 
Dubai's Avatar
 
Join Date: Mar 2005
Location: Dubai, UAE
Posts: 2,389
Likes: 0
Received 0 Likes on 0 Posts
Default

I assume your talking about the grinding from 1st to 2nd, well thats a downside for the 350z and a common problem here
Old 01-06-2006, 07:51 PM
  #6  
ASTIG_Z
New Member
iTrader: (8)
 
ASTIG_Z's Avatar
 
Join Date: Jul 2005
Location: SOCAL
Posts: 3,022
Likes: 0
Received 0 Likes on 0 Posts
Default

Really? I havent experienced that yet...i have an 05 also.
Old 01-06-2006, 07:53 PM
  #7  
bamyi
Registered User
iTrader: (2)
 
bamyi's Avatar
 
Join Date: Aug 2004
Location: Denver, CA
Posts: 3,789
Likes: 0
Received 0 Likes on 0 Posts
Default

no, I had my tranny replace already due to grinding. its just when I shift out of 1st its not smooth uless i ride the clutch. Maybe its just me.
Old 01-06-2006, 08:01 PM
  #8  
Gryphin
Registered User
iTrader: (4)
 
Gryphin's Avatar
 
Join Date: May 2005
Location: Houston, Tx
Posts: 830
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by bamyi
no, I had my tranny replace already due to grinding. its just when I shift out of 1st its not smooth uless i ride the clutch. Maybe its just me.
same 06 here.
Old 01-06-2006, 08:35 PM
  #9  
lilchief
Registered User
Thread Starter
 
lilchief's Avatar
 
Join Date: Jan 2005
Location: Louisiana
Posts: 171
Likes: 0
Received 0 Likes on 0 Posts
Default

well thats is not what i was talking about. It was just real hard to shift perfect without jerking the car but no more.
Old 01-08-2006, 01:17 PM
  #10  
pedroosan
Registered User
iTrader: (1)
 
pedroosan's Avatar
 
Join Date: Aug 2005
Location: nw
Posts: 216
Likes: 0
Received 0 Likes on 0 Posts
Default

Were you able to tell that the clutch has too much play?
I mean did the engagement point change, so you could never get used to one point, and it would engage sometimes too soon, sometimes too late?

Is that what is meant by clutch play?

Or did they re-adjust the clutch engagement point (lower it?) since it is so high (pedal so far out)

Thanks! I am trying to see if I am affected. I do think it is difficult to go into 1st , but I wasn't sure whether it is generally with a sports car like that or whether there is a problem with the clutch.
Old 01-08-2006, 02:32 PM
  #11  
JunJTan
Registered User
 
JunJTan's Avatar
 
Join Date: Oct 2005
Location: OR
Posts: 630
Likes: 0
Received 0 Likes on 0 Posts
Default

1st to 2nd gear is always tougher than other gears.
Old 01-08-2006, 04:49 PM
  #12  
Fa1rLadyZ
Registered User
 
Fa1rLadyZ's Avatar
 
Join Date: Dec 2005
Location: Socal.
Posts: 241
Likes: 0
Received 0 Likes on 0 Posts
Default

i have 06 and also have hard time shifting from 1st to 2nd... should i take my car to the dealer???
Old 01-08-2006, 04:51 PM
  #13  
Vamos_Rafael
Registered User
iTrader: (18)
 
Vamos_Rafael's Avatar
 
Join Date: Aug 2005
Location: Villanova University
Posts: 1,072
Likes: 0
Received 0 Likes on 0 Posts
Default

give it a tiny blip from 1st to 2nd
that will help the synchros catch the gears better
try it with like 300rpm blip while shifting
Old 01-08-2006, 05:00 PM
  #14  
Z33GRIP
Registered User
iTrader: (7)
 
Z33GRIP's Avatar
 
Join Date: Dec 2005
Location: Southern California
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
Default

i have an 06 and found that from 1st to 2nd, it grinds a little bit when the car is cold. once warmed up, the grinding goes away.

although it's a different manufacture, my brother has a 2005 s2000 and his 1st to 2nd is the same way as well as my buddy's 2004 nsx.
Old 01-08-2006, 05:03 PM
  #15  
Vamos_Rafael
Registered User
iTrader: (18)
 
Vamos_Rafael's Avatar
 
Join Date: Aug 2005
Location: Villanova University
Posts: 1,072
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Z33GRIP
i have an 06 and found that from 1st to 2nd, it grinds a little bit when the car is cold. once warmed up, the grinding goes away.

although it's a different manufacture, my brother has a 2005 s2000 and his 1st to 2nd is the same way as well as my buddy's 2004 nsx.
Becase 1st to 2nd is more pressure ...
blip it a little...
Old 01-08-2006, 05:26 PM
  #16  
Liz Ahn
Registered User
 
Liz Ahn's Avatar
 
Join Date: Jan 2006
Location: los angeles, ca
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

i think i have the same problem as well on my 05 but it doesn't bother me too much... i just assumed all Z's were like that~ =P
Old 01-08-2006, 06:50 PM
  #17  
Tsex On 19s
Registered User
iTrader: (6)
 
Tsex On 19s's Avatar
 
Join Date: Jan 2005
Location: Kissimmee/Orlando
Posts: 802
Likes: 0
Received 0 Likes on 0 Posts
Default

I know what ur talking about, just isnt a smooth shift as the other gears. Try keeping the rpm's lower and shift faster. Its hard to explain in text, but just being light on ur feet in the first to second shift, in my opinion it makes the car shift much smoother. hope that helped at all..
Old 01-08-2006, 07:50 PM
  #18  
Echo853
Registered User
 
Echo853's Avatar
 
Join Date: Oct 2005
Location: Canada
Posts: 3,028
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by bamyi
wait, explain your jerking problem again.
Bwa-hahahaha!!! ...Whoooo... Too funny.
Attached Thumbnails 2005 350z shifting problems???-spooge.gif  
Old 01-08-2006, 09:44 PM
  #19  
Checkmate58
Registered User
iTrader: (11)
 
Checkmate58's Avatar
 
Join Date: Nov 2005
Location: Bay Area
Posts: 350
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Z33GRIP
i have an 06 and found that from 1st to 2nd, it grinds a little bit when the car is cold. once warmed up, the grinding goes away.
Just curious, lets say within the first few minutes of you starting your car, if you change from 1st to 2nd on a very high rev, will it grind more?

Higher rpms-->more noticeable grind?

--Sam
Old 01-08-2006, 11:47 PM
  #20  
Z_Driver
Master
iTrader: (3)
 
Z_Driver's Avatar
 
Join Date: Nov 2003
Location: SF Bay Area
Posts: 2,556
Likes: 0
Received 0 Likes on 0 Posts
Default

There's too much grinding and jerking going on in this thread.


Quick Reply: 2005 350z shifting problems???



All times are GMT -8. The time now is 03:11 PM.