Lot's of Talking the Talk........
Thread Starter
Registered User
Joined: Jan 2009
Posts: 11
Likes: 0
From: New York
The purpose of my question was to ask who preferred performance over looks, or rather form over function. Apparently I touched a nerve with Lil' Eric there. As to why my car is 2" low, perhaps it's due to the bilstein coil overs......I'm not sure. If it bugs you Eric, I will certainly raise it a bit to keep you happy.
I will post pix next week. And yes Lil' Eric, there will be more than one photo. Let me know what you would like me to add to substantiate authenticity and I will gladly accommodate you.
At present my Z is in the shop. Since my original profile listing, the following has changed: Motor has been "built" and now has forged rods and pistons as well as a Giken twin plate clutch. The boost will remain at 8.5. I am not sure how it will do on the dyno. Prior to these mods, the chip was removed and the motor was retuned with the "Uprev" system. When that was done, it dynoed at 384 rwp. I'm really curious to see what it does on the next pull. Hopefully better!
I will post pix next week. And yes Lil' Eric, there will be more than one photo. Let me know what you would like me to add to substantiate authenticity and I will gladly accommodate you.
At present my Z is in the shop. Since my original profile listing, the following has changed: Motor has been "built" and now has forged rods and pistons as well as a Giken twin plate clutch. The boost will remain at 8.5. I am not sure how it will do on the dyno. Prior to these mods, the chip was removed and the motor was retuned with the "Uprev" system. When that was done, it dynoed at 384 rwp. I'm really curious to see what it does on the next pull. Hopefully better!
The purpose of my question was to ask who preferred performance over looks, or rather form over function. Apparently I touched a nerve with Lil' Eric there. As to why my car is 2" low, perhaps it's due to the bilstein coil overs......I'm not sure. If it bugs you Eric, I will certainly raise it a bit to keep you happy.
I will post pix next week. And yes Lil' Eric, there will be more than one photo. Let me know what you would like me to add to substantiate authenticity and I will gladly accommodate you.
At present my Z is in the shop. Since my original profile listing, the following has changed: Motor has been "built" and now has forged rods and pistons as well as a Giken twin plate clutch. The boost will remain at 8.5. I am not sure how it will do on the dyno. Prior to these mods, the chip was removed and the motor was retuned with the "Uprev" system. When that was done, it dynoed at 384 rwp. I'm really curious to see what it does on the next pull. Hopefully better!
I will post pix next week. And yes Lil' Eric, there will be more than one photo. Let me know what you would like me to add to substantiate authenticity and I will gladly accommodate you.
At present my Z is in the shop. Since my original profile listing, the following has changed: Motor has been "built" and now has forged rods and pistons as well as a Giken twin plate clutch. The boost will remain at 8.5. I am not sure how it will do on the dyno. Prior to these mods, the chip was removed and the motor was retuned with the "Uprev" system. When that was done, it dynoed at 384 rwp. I'm really curious to see what it does on the next pull. Hopefully better!
The purpose of my question was to ask who preferred performance over looks, or rather form over function. Apparently I touched a nerve with Lil' Eric there. As to why my car is 2" low, perhaps it's due to the bilstein coil overs......I'm not sure. If it bugs you Eric, I will certainly raise it a bit to keep you happy.
I will post pix next week. And yes Lil' Eric, there will be more than one photo. Let me know what you would like me to add to substantiate authenticity and I will gladly accommodate you.
At present my Z is in the shop. Since my original profile listing, the following has changed: Motor has been "built" and now has forged rods and pistons as well as a Giken twin plate clutch. The boost will remain at 8.5. I am not sure how it will do on the dyno. Prior to these mods, the chip was removed and the motor was retuned with the "Uprev" system. When that was done, it dynoed at 384 rwp. I'm really curious to see what it does on the next pull. Hopefully better!
I will post pix next week. And yes Lil' Eric, there will be more than one photo. Let me know what you would like me to add to substantiate authenticity and I will gladly accommodate you.
At present my Z is in the shop. Since my original profile listing, the following has changed: Motor has been "built" and now has forged rods and pistons as well as a Giken twin plate clutch. The boost will remain at 8.5. I am not sure how it will do on the dyno. Prior to these mods, the chip was removed and the motor was retuned with the "Uprev" system. When that was done, it dynoed at 384 rwp. I'm really curious to see what it does on the next pull. Hopefully better!
Drag racing, autocrossing, road racing, drifting, rally etc.......
When you said you were a "walker", I thought you were implying that you "do" stuff.
But you just listed a bunch of parts. While I fully respect the skills required to modify and tune a car, it sounds like you just signed the checks that payed for the parts/labor.
That's not "walking". That's shopping.
Last edited by Z1NONLY; Apr 24, 2010 at 05:29 PM.
Registered User
Joined: Mar 2010
Posts: 135
Likes: 0
From: California
rofl "corporate executive".... nice 
For an old dude, you're profile makes you look like an obnoxious 7th grader.
no offense..
It's cool to be praised, but it's not cool to say "look at me everyone, check me out!"
Oh... and I find it funny that you're going to stoop down as to "raise" your car's height to please someone else, rather than pleasing yourself.
For an old dude, you're profile makes you look like an obnoxious 7th grader.
no offense..
It's cool to be praised, but it's not cool to say "look at me everyone, check me out!"
Oh... and I find it funny that you're going to stoop down as to "raise" your car's height to please someone else, rather than pleasing yourself.
Last edited by Litesung; Apr 24, 2010 at 06:35 PM.
+1
There are a lot of people who mod their cars so that they are better at a given sport they participate in.
Drag racing, autocrossing, road racing, drifting, rally etc.......
When you said you were a "walker", I thought you were implying that you "do" stuff.
But you just listed a bunch of parts. While I fully respect the skills required to modify and tune a car, it sounds like you just signed the checks that payed for the parts/labor.
That's not "walking". That's shopping.
Drag racing, autocrossing, road racing, drifting, rally etc.......
When you said you were a "walker", I thought you were implying that you "do" stuff.
But you just listed a bunch of parts. While I fully respect the skills required to modify and tune a car, it sounds like you just signed the checks that payed for the parts/labor.
That's not "walking". That's shopping.
The purpose of my question was to ask who preferred performance over looks, or rather form over function. Apparently I touched a nerve with Lil' Eric there. As to why my car is 2" low, perhaps it's due to the bilstein coil overs......I'm not sure. If it bugs you Eric, I will certainly raise it a bit to keep you happy.
I will post pix next week. And yes Lil' Eric, there will be more than one photo. Let me know what you would like me to add to substantiate authenticity and I will gladly accommodate you.
At present my Z is in the shop. Since my original profile listing, the following has changed: Motor has been "built" and now has forged rods and pistons as well as a Giken twin plate clutch. The boost will remain at 8.5. I am not sure how it will do on the dyno. Prior to these mods, the chip was removed and the motor was retuned with the "Uprev" system. When that was done, it dynoed at 384 rwp. I'm really curious to see what it does on the next pull. Hopefully better!
I will post pix next week. And yes Lil' Eric, there will be more than one photo. Let me know what you would like me to add to substantiate authenticity and I will gladly accommodate you.
At present my Z is in the shop. Since my original profile listing, the following has changed: Motor has been "built" and now has forged rods and pistons as well as a Giken twin plate clutch. The boost will remain at 8.5. I am not sure how it will do on the dyno. Prior to these mods, the chip was removed and the motor was retuned with the "Uprev" system. When that was done, it dynoed at 384 rwp. I'm really curious to see what it does on the next pull. Hopefully better!
And... why is built in quotations? Most of us on here do work to our cars ourselves... we know what built means haha.
I bet it wasn't your intention, but you're giving NY a bad rep.
I think this is him
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/xdzN95syKOQ&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/xdzN95syKOQ&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
What no this is him right here
<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/QYj9BRCYBQs&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/QYj9BRCYBQs&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/xdzN95syKOQ&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/xdzN95syKOQ&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
What no this is him right here
<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/QYj9BRCYBQs&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/QYj9BRCYBQs&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>
Last edited by jones21; Apr 24, 2010 at 07:53 PM.
There are a lot of people who mod their cars so that they are better at a given sport they participate in.
Drag racing, autocrossing, road racing, drifting, rally etc.......
When you said you were a "walker", I thought you were implying that you "do" stuff.
But you just listed a bunch of parts. While I fully respect the skills required to modify and tune a car, it sounds like you just signed the checks that payed for the parts/labor.
That's not "walking". That's shopping.
Drag racing, autocrossing, road racing, drifting, rally etc.......
When you said you were a "walker", I thought you were implying that you "do" stuff.
But you just listed a bunch of parts. While I fully respect the skills required to modify and tune a car, it sounds like you just signed the checks that payed for the parts/labor.
That's not "walking". That's shopping.
Registered User
Joined: Oct 2007
Posts: 567
Likes: 1
From: Ohio, Cleveland
lol, i love the videos. i've seen the first one before and thought ok its set up and a joke, but the second one??? its for real. looks like an patrol car with all the lights and strobes. i was about to crack up at the end if he ran over his camera man. hahaha crazy
I digress but the point is it takes a long time for most people to even have either one so they do what they can along the way.
