Lifessimple

iTrader: (1)

I currently have cosmis xt006 18x9.5 +10 and 18x11+8 non brembo on coilovers and spc arms in the rear only, no camber adjustment up front. And in the process of doing a brembo conversion and it doesn't clear the spokes on the wheel in the front so far. The design of the spoke seems to be concaved more than xt206's which is what I'm seeing posts on but np luck on this wheel. so I was hoping to run some spacers but not sure which size, thinking about getting some clean fenders to make up for the poke as well.. someone mentioned to run 20/25mm but that was for the xt206 which are the same offsets BUT does it still apply if the spokes seem to be CONCAVED more? I don't want to run any camber either so if I need fenders to he flush after the spacers I will.

dboyzalter

iTrader: (3)

Should just get new wheels, or live with the small brakes.