Originally Posted by Tech Territory

Sound like a good deal to you? Yes. Yes it is.

Originally Posted by travlee

no it doesnt sound like a good deal to me, why... because they dont fit. below are stock offsets, if you do get the spacer/adpater you will effectively be a +7 front and rear.. you will more than likely rub more than a prostitute giving a hand job, i ran 18x9.5 +23 front and 18x9.5+15 in the rear and it was dang near perfect that is pretty much the norm (some run 18x10.5 +15 rear) it also requires rolling the fenders in the rear for both 9.5 and 10.5. my fronts rubbed the top upper fender liner screw, so you being .70 inches out from the centerline in the front will cause issues, and .27 inches further out rear.. unless you have stupid camber gang retard settings, you will prob will not only need to roll the fenders but also pull them. not to mention to get the retarded camber, you will need parts that chik-fila wages prob wont cover

with your very limited driving experience, you dont even need to worry about racing slicks or whatever tires are making your dick hard. you should focus on not Dugan'ing the car

Performance/Touring - 18x8 - 30 offset
Track - 18x8-30 front, 18x8.5-33 rear

Originally Posted by i8acobra

Kids these days... "I want it right now! Even if I can't afford to do it right". I really wish used 350Z's cost $30k so kids with no money would stop buying them. Know what I drove when I was 15... a bicycle. It's what I could realistically afford.

Originally Posted by travlee

post pics of the car

Originally Posted by travlee

I am sure I am not the only one who is curious

Originally Posted by Tech Territory

for?

Originally Posted by Tech Territory

of what the car looks like? Its a Z...? its not great right now on the old wheels and wider molded quarters

Originally Posted by travlee

post pics of the car

Originally Posted by Tech Territory

for?

Originally Posted by Tech Territory

Hello! I have a 2003 Nissan 350z Touring Hatch, and I just bought a set of KLÄSSEN iD wheels that the previous owner had on his BMW M2, and I cannot seem to find a set of adapters that match my 350z's hub specs (66.1mm hub, 5x114.3 bolt pattern, M12x1.25 thread size) that can also adapt to the KLÄSSEN iD Wheels (72.6mm hub, 5x120 bolt pattern, M14x1.25 thread size) can I get some help??? I dont want any poke really, so the smallest adapter possible would be appreciated, so probably about 20mm thick (Less is also great, havent found any though)

Anyways, I really need some help, new to this all, and I cannot seem to figure it out, sorry guys, probably super easy to find, but im having a heck of a time

Originally Posted by Tech Territory

Im sorry, i get what your saying, but I have been saving up for about a year, and I have about 4k in the bank account right now, its not a instant gratification thing, its that I thought I could make the wheels work, and they were a good price, didnt know adapters were so difficult to find in this size

Originally Posted by MicVelo

Did the fact that I gave you the source for the exact adapters you need - with a positive word about the company and their products - somehow escape you? I guess it's easy to miss it since I only said it three times.

Originally Posted by travlee

He will be back with some crap like I screwed up my car or I drifted into a pole

Originally Posted by travlee

He will be back with some crap like I screwed up my car or I drifted into a pole

Originally Posted by travlee

I mainly want to see the "wide fender set", my guess they are just rivet on flares that left the original in tact