370 mods
#1
Registered User
Thread Starter
Join Date: Jul 2012
Location: Allen
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
370 mods
Thought I'd post a shopping list of mods I wanna do on my z and see what you guys think. Im gonna stay NA and I'm aiming for at least 400 horse.
Cold-air
Intake manifold
longtube headers
exhaust (obviously)
pulleys
4.5 stroker
bored (if i can)
ported/polish heads (if necessary)
cams
tune
gears
twin plate clutch
flywheel
driveshaft
Cold-air
Intake manifold
longtube headers
exhaust (obviously)
pulleys
4.5 stroker
bored (if i can)
ported/polish heads (if necessary)
cams
tune
gears
twin plate clutch
flywheel
driveshaft
#6
Registered User
Thread Starter
Join Date: Jul 2012
Location: Allen
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
I don't actually, this is more of a once I free up some income list. Why doesnt it make sense? How else would I increase power Without FI?.. I know I can slap on turbo or sc an call it a day, but thats not my goal. I want to build the z NA
Trending Topics
#13
New Member
iTrader: (20)
Most of the mods listed really aren't needed IMO.
Thought I'd post a shopping list of mods I wanna do on my z and see what you guys think. Im gonna stay NA and I'm aiming for at least 400 horse.
Cold-air - stillen G3's although they're pricey if brand new
Intake manifold - motordyne manifold adds midrange but hurts topend
longtube headers - makes a bit more power than regular test pipes, good if you're chasing after every last HP
exhaust (obviously) - i don't even have a full exhaust
pulleys - crank pulley is cheap, wouldn't bother with the rest
4.5 stroker - $$$$$$$$$$$$
bored (if i can) - lol wut
ported/polish heads (if necessary) - overkill IMO
cams - you'll never find an aftermarket INTAKE cam
tune - UPREV all the way
gears - 4.08's all the way and i hope you have good tires
twin plate clutch - overkill, but you'll need an aftermarket CSC for any aftermarket clutch
flywheel - stay away from fidanza, go with JWT
driveshaft - ummm, no. stock is already carbon fiber
Cold-air - stillen G3's although they're pricey if brand new
Intake manifold - motordyne manifold adds midrange but hurts topend
longtube headers - makes a bit more power than regular test pipes, good if you're chasing after every last HP
exhaust (obviously) - i don't even have a full exhaust
pulleys - crank pulley is cheap, wouldn't bother with the rest
4.5 stroker - $$$$$$$$$$$$
bored (if i can) - lol wut
ported/polish heads (if necessary) - overkill IMO
cams - you'll never find an aftermarket INTAKE cam
tune - UPREV all the way
gears - 4.08's all the way and i hope you have good tires
twin plate clutch - overkill, but you'll need an aftermarket CSC for any aftermarket clutch
flywheel - stay away from fidanza, go with JWT
driveshaft - ummm, no. stock is already carbon fiber
#14
Registered User
Thread Starter
Join Date: Jul 2012
Location: Allen
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Looks like you made suggestions for the majority of the list. Bored as in bore the heads?.. Yes i found out the driveshaft is carbon after I posted this and as far as the clutch I wasnt sure about the clutch but ive been assured its not necessary to upgrade.
North Dallas area
North Dallas area
Thread
Thread Starter
Forum
Replies
Last Post
Tochigi_236
Feedback & Suggestions for Our Forum
8
09-27-2015 03:40 PM