Tried to search and visit BC website no results.

Installed the BC Suspension kit two nights ago went very well, was wondering if there is a Alignment Spec?

Im lowered 26 1/2" from ground to fender in the rear and 26" in the front. All Damenings are set at Neutral, also have rear camber kit installed.


Thanks

 

not surprised that BC didn't provide the alignment specs. It's usually given by Nissan and the alignment places should know the correct range for the toe and camber. So, unless you want to customize it for track or something, it'll be fine by just letting the alignment place do the work and set it and ask for minimum tire wear or best handling within the stock specs.

here (found on google):

Left Front
Min Nominal Max
Camber -1.33 -0.58 -0.80
Caster 7.42 8.17 8.20
Toe 0.00 0.02 0.02

Right Front
Min Nominal Max
Camber -1.33 -0.58 0.17
Caster 7.42 8.17 8.92
Toe 0.00 0.02 0.04

Total Front
Min Nominal Max
Cros Camber -0.75 0.00 0.75
Cross Caster -0.75 0.00 0.75
Total Toe 0.00 0.04 0.08
Set Back

Left Rear
Min Nominal Max
Camber -2.08 -1.58 -1.08
Toe 0.02 0.04 0.05

Right Rear
Min Nominal Max
Camber -2.08 -1.58 -1.08
Toe 0.02 0.04 0.05

Total Rear
Min Nominal Max
Total Toe 0.4 0.8 0.11

 

Thanks zettahertz!

Forgot to Mention have 19/245/35 +22 offset in the front and 19/275/35 +23 offset in the back. still ok?

any other suggestions.

 

I don't think wheel sizes matter.

 

It doesn't

 

getting my car aligned tommorow going to use stock spec unless any other opinions

 

Thanks for the alignment specs: question: R front camber max 0.17, L front max, camber -0.80? Please confirm.
harvey a

 

I think those are the specs given after the TSB for tire feathering. Are you thinking of running them at the max camber?

But from my last alignment sheet it shows -1.3º to .2º for both front.