CDT HD62 and fitment
07-28-2005, 08:48 AM
#2
I have installed the CDT HD62's in mine. Went in VERY Easy.
You can mount the crossover next to the speaker, as there is room between the door frame and the door skin.
The 6.5 will need a little bit of a spacer, just use the grill holders that come with the speakers as a spacer.
The Tweeters go in the stock spot perfectly.
I also did the CDT coaxials in the rear and I couldnt be happier. I used
a RF 150w 2 Channel amp on all 4 speakers (2ohms per channel, L/R) and
a RF 150w 1 Channel amp on my MB Quart Reference 10 in the stock location.
You can mount the crossover next to the speaker, as there is room between the door frame and the door skin.
The 6.5 will need a little bit of a spacer, just use the grill holders that come with the speakers as a spacer.
The Tweeters go in the stock spot perfectly.
I also did the CDT coaxials in the rear and I couldnt be happier. I used
a RF 150w 2 Channel amp on all 4 speakers (2ohms per channel, L/R) and
a RF 150w 1 Channel amp on my MB Quart Reference 10 in the stock location.
Thread
Thread Starter
Forum
Replies
Last Post
