i disconnected my window moledule and all the wires came out of the harness. I do not
know where each wire goes. I am willing to pay somebody, please help me out. It's the module in the driver side door with the window up and window down switch and door un lock and lock. My windows are down and it's raining outisde

My car is an 04 6mt.

 

The module inside the driver's door?

Would a color picture or two help?

Do you know how to read an electrical diagram from the manual?

 

Don't forget that you can close the windows using the door key - put the key in and rotate it counter clockwise like you're locking it and hold it there for a couple of seconds. Dang - looked at the drawing and if you've got it all the way apart this isn't going to work.

 

Here's the diagram:

 

Damn you guy's are good!!

 

And some pictures:







You owe me a beer.

 

 

He!! I could wire it with all that. Were you guy's get so much knowledge of the Z?

 

Nissan 350Z Color Code

B = Black
W = White
R = Red
G = Green
L = Blue
Y = Yellow
LG = Light Green
BR = Brown
OR = Orange
P = Pink
PU = Purple (Magenta)
GY = Gray
SB = Sky Blue (Cyan)
CH = Dark Brown (Chocolate)
DG = Dark Green

When the color is striped the base coler is given first, followed by the stipe color as shown here: L/W is Blue with a White stripe.

 

I have a service manual and ninja photoshop skills ... and ducted into the garage and pulled my door panel up to take some pictures for the guy. Nothing more than anyone else would do given the chance.

 

Paul not to rob this thread but I have a question for you, you seem so knowledgeable. What tools do I need to put on my JWT charger and heat sheild. Those two screws in the air snorkel might be tough. Thanks

 

Thats Awesome you guy's Rock!!

 

I'm an electrical engineer ... and not much of a mechanic! I was in there in March of last year to swap out mine for a K&N. There wasn't anything I ran across that scared me ... just don't move that air valve in the manifold. Are there special screws in there? I don't remember but I do have a "security bit" kit that I use to crack into game machines and cable boxes.

 

you need a tamper proof torx bit... it's a torx bit with a hole in the middle...

buy a set for 15 bucks at advanceautoparts or autozone