I know many of you have already played with the stock sub inclosure, but i was wondering if anyone had any insite if it would be possible to place to 10" subs in the stock location. I havent examened the stock inclosure but would it be possible to build a custum box in the stock area? Whats behind the stock sub? I have two 10" that where in my Nissan Xterra so i want to put them somewhere (dont want to remove spare). Could it be possible to place them at angles inside the area? If anyone understands and has any clue on possiblitys please reply.

 

I don't know about 10"s but I plan on putting 2 solobaric 8"s in that location. I've talked with a few installers and they said that would be the best option.

Mike

 

I'm not sure about 2 10" in the factory location. I've seen plenty of pics in this forum with 2 8's. I have 1 10" IDQ in the factory spot. That's all that looks like can fit in that spot. There's a thread with someone who added 2 10's but one in each compartment (the "glove box" behind the passenger seat was removed for this)...Hope this helps...

 

The only option i can think of for two 10's in the factory spot would be an isobaric set up, but it would be difficult to get in that small an area. You'd do better (probably) to just build a box to fit in the cargo area for 2 10s. Nazar (i think?) has made a fiberglass sub box that fits under the tower bar facing the rear of the trunk.