link to my system install thread
https://my350z.com/forum/exterior-and-interior/293864-pics-of-my-installs-and-mods.html
I dont know how to make the actual pictures show up in the thread..but there you go. finally complete.
I dont know how to make the actual pictures show up in the thread..but there you go. finally complete.
Trending Topics
Originally Posted by doug
i'm not feeling any of it.. headlights... sub box.. the rear speakers.. the grill... the head unit install.. sorry nothing at all
+1.......but to each their own. if you like it, more power to you!
what do you not like about it? input please. As I said, I did all of this work myself. The grill and eyelids I dont care about, nobody likes those but me. But you say you dont like any of it stereo install included, I would appreciate some constructive criticism. thanks.
I find that on this site alot of people don't like critism .. they get bent out of shape and call you a hater.. but since you don't mind.. i will share my ideas and thoughts..
Head Unit - i am a fan of Double Din's.. the single din isn't that bad.. but it leaves the tray under... just doesn't look as uniformed.. if you had a single din eq under it it would compliment it better
Sub Box - should make it all one level... make it more uniformed.. or go with the dual 12 sub box (no trunk space) or the Under the strut bar sub box
Rear Speakers - i am not feeling those grills.. look out of place.. a bit too flashy for the system.. if you had fiberglass everywhere with the same color.. then yeah.. ok.. but just go with a simple black grill
Amp Rack - clean it up a bit.. i would get rid of the cross overs in the middle.. but if you really want to keep them.. look into little black plastic clips to the wires in place.. right now they are just all over
here is a shot if the back of my amp rack so you know what the black pieces i am talking about
Head Unit - i am a fan of Double Din's.. the single din isn't that bad.. but it leaves the tray under... just doesn't look as uniformed.. if you had a single din eq under it it would compliment it better
Sub Box - should make it all one level... make it more uniformed.. or go with the dual 12 sub box (no trunk space) or the Under the strut bar sub box
Rear Speakers - i am not feeling those grills.. look out of place.. a bit too flashy for the system.. if you had fiberglass everywhere with the same color.. then yeah.. ok.. but just go with a simple black grill
Amp Rack - clean it up a bit.. i would get rid of the cross overs in the middle.. but if you really want to keep them.. look into little black plastic clips to the wires in place.. right now they are just all over
here is a shot if the back of my amp rack so you know what the black pieces i am talking about
Last edited by doug; Aug 14, 2007 at 06:08 PM.
Originally Posted by doug
I find that on this site alot of people don't like critism .. they get bent out of shape and call you a hater.. but since you don't mind.. i will share my ideas and thoughts..
Head Unit - i am a fan of Double Din's.. the single din isn't that bad.. but it leaves the tray under... just doesn't look as uniformed.. if you had a single din eq under it it would compliment it better
Sub Box - should make it all one level... make it more uniformed.. or go with the dual 12 sub box (no trunk space) or the Under the strut bar sub box
Rear Speakers - i am not feeling those grills.. look out of place.. a bit too flashy for the system.. if you had fiberglass everywhere with the same color.. then yeah.. ok.. but just go with a simple black grill
Amp Rack - clean it up a bit.. i would get rid of the cross overs in the middle.. but if you really want to keep them.. look into little black plastic clips to the wires in place.. right now they are just all over
here is a shot if the back of my amp rack so you know what the black pieces i am talking about

Head Unit - i am a fan of Double Din's.. the single din isn't that bad.. but it leaves the tray under... just doesn't look as uniformed.. if you had a single din eq under it it would compliment it better
Sub Box - should make it all one level... make it more uniformed.. or go with the dual 12 sub box (no trunk space) or the Under the strut bar sub box
Rear Speakers - i am not feeling those grills.. look out of place.. a bit too flashy for the system.. if you had fiberglass everywhere with the same color.. then yeah.. ok.. but just go with a simple black grill
Amp Rack - clean it up a bit.. i would get rid of the cross overs in the middle.. but if you really want to keep them.. look into little black plastic clips to the wires in place.. right now they are just all over
here is a shot if the back of my amp rack so you know what the black pieces i am talking about
As for the sub box. I did this YEARS ago, and I wanted a cool design that wasnt constantly seen. If I had it to do over again. I woudl do somethiung mouch more simple, that was more uniform. I agree with youy and I appreciate the info. Next install will be all uniform and maybe a little bit less flashy.
As for the rear speakers. Do you think it would be a better idea to recess the componets and put some black speaker cloth around them and loose the grills. I think i will do so, but in due time. As I said, I am tired of installing and actually want to drive my car, so I will give it a few months. Winter may show my install being quite differnt.
I like your amp rack alot. I wanted to show off the crossovers, since I think they are so nice and clean looking, maybe flush mounting and hiding the wiring is in order next time around.
Thanks for all the input, positive and negative. I need them both. I am not a child and I can take the haters and the likers as long as both have good objective inmput. nothing is set in stone and I can change many things in the future.
THANKS MY350Z.COM memmber=s. You are all the apitomy of the word "enthusiast"
HU - what voltage where you looking at? my eclipse deck is 5V
SubBox - you could even keep it the same way.. just get a flat baseboard so it looks like 1 level
Rear - if it doesn't bother you.. you could even paint those grils black.. make it a little more uniform
Amp Rack - Crossovers look nice up there.. keep them up there.. just clean up the wiring
...........
I hear you on the work done.. time to rest.. i feel the same way.. i want to switch my RCA's to a better set.. but i am too lazy right now to pull the rear panel off and run the wires under the carpet again.. sometimes you just want to enjoy your music for a while.. i hear you.
SubBox - you could even keep it the same way.. just get a flat baseboard so it looks like 1 level
Rear - if it doesn't bother you.. you could even paint those grils black.. make it a little more uniform
Amp Rack - Crossovers look nice up there.. keep them up there.. just clean up the wiring
...........
I hear you on the work done.. time to rest.. i feel the same way.. i want to switch my RCA's to a better set.. but i am too lazy right now to pull the rear panel off and run the wires under the carpet again.. sometimes you just want to enjoy your music for a while.. i hear you.
that headunit has 6.5v preamps
http://www.pioneerelectronics.com/pn...tailsComponent
btw where did you get those clips?
...could shrink wrap them, and then tie them down.
http://www.pioneerelectronics.com/pn...tailsComponent
btw where did you get those clips?
...could shrink wrap them, and then tie them down.
Last edited by Tackett; Aug 15, 2007 at 08:47 AM.
Originally Posted by doug
I hear you on the work done.. time to rest.. i feel the same way.. i want to switch my RCA's to a better set.. but i am too lazy right now to pull the rear panel off and run the wires under the carpet again.. sometimes you just want to enjoy your music for a while.. i hear you.
Dont you hate when you are finally finished with something and ride around and something screws up or you notice that you screwed it up? God I hate that. I can never seem to get anything right the first time I do it. Always have to end up revisiting a project like twice to get it right.
here are my rcas
http://www.woofersetc.com/index.cfm?...roduct_ID=4335
Last edited by Tackett; Aug 15, 2007 at 08:55 AM.
Originally Posted by Tackett
that headunit has 6.5v preamps
http://www.pioneerelectronics.com/pn...tailsComponent
btw where did you get those clips?
...could shrink wrap them, and then tie them down.
http://www.pioneerelectronics.com/pn...tailsComponent
btw where did you get those clips?
...could shrink wrap them, and then tie them down.
Originally Posted by Tackett
I need to move mine...Im getting a very slight engine whine from the front speakers even with an rca filter. Its real low and you cant really hear it unless you are listening for it. another day perhaps.
Dont you hate when you are finally finished with something and ride around and something screws up or you notice that you screwed it up? God I hate that. I can never seem to get anything right the first time I do it. Always have to end up revisiting a project like twice to get it right.
here are my rcas
http://www.woofersetc.com/index.cfm?...roduct_ID=4335
Dont you hate when you are finally finished with something and ride around and something screws up or you notice that you screwed it up? God I hate that. I can never seem to get anything right the first time I do it. Always have to end up revisiting a project like twice to get it right.
here are my rcas
http://www.woofersetc.com/index.cfm?...roduct_ID=4335
Thread
Thread Starter
Forum
Replies
Last Post
Gruppe-S
Body Interior
13
May 16, 2016 10:42 PM
350Z Project X
Suspension
9
Oct 10, 2015 09:23 AM
Tochigi_236
Feedback & Suggestions for Our Forum
8
Sep 27, 2015 03:40 PM


















