ok, im getting the wiring harness all soldered up but there are a few that dont match up

i have a metra kit going to a alpine iva x100 harness

on the metra side i have 1) amp turn on 2) amp ground 3) dimmer

on the alpine side i have 1) audio interupt in 2) remote turn-on

if im using an amp to run my mids and highs i dont need to connect the wires right?

 

If you have no amps I think you are ok.

 

let me rephrase:

ok, im getting the wiring harness all soldered up but there are a few that dont match up

i have a metra kit going to a alpine iva x100 harness

on the metra side i have 1) amp turn on 2) amp ground 3) dimmer

on the alpine side i have 1) audio interupt in 2) remote turn-on

i am running my mids and highs off of an amp. do i need to connect each posotive and negative for each channel coming from the head unit even if i wont be using them?

 

no you don't connect them. cap off the three you listed on the metra side. then the audio interupt would be used if you have a telephone system installed. the remote turn-on would be run to your aftermarket amp.

 

Sorry to jump in, but I figured your questioned were answered..

The audio interrupt - would you need this when you use the KCE bluetooth unit? Doesn't the unit plug straight into the headunit? Or do you splice it up with the interrupt wire?

 

way to ressurect!

no you dont need it, the unit will take over