AVH-4200 wiring to non-Bose
Hi All,
This forum has loads of info! I haven't install a car stereo in years. But the non-bose system is better when turned off. I like to listen to music sometimes, so I just installed a Pioneer AVH-4200DVD along with new speakers front and rear with a Infinity Basslink behind the driver's seat. It now sounds a million times better.
This is a quick schematic of the interface between the stock 350z wiring, Metra 70-7550 harness and Pioneer AVH-4200DVD (it will work for other Pioneer models as well).
I used a spdt switch from Radio Shack for the DVD bypass, I didn't want to do the relay method because I would have to bypass it if I want to use the Auto Eq. I have a microphone on order, anyone have any experience with Auto Eq? There isn't much info on it's use in the manual.
This forum has loads of info! I haven't install a car stereo in years. But the non-bose system is better when turned off. I like to listen to music sometimes, so I just installed a Pioneer AVH-4200DVD along with new speakers front and rear with a Infinity Basslink behind the driver's seat. It now sounds a million times better.
This is a quick schematic of the interface between the stock 350z wiring, Metra 70-7550 harness and Pioneer AVH-4200DVD (it will work for other Pioneer models as well).
I used a spdt switch from Radio Shack for the DVD bypass, I didn't want to do the relay method because I would have to bypass it if I want to use the Auto Eq. I have a microphone on order, anyone have any experience with Auto Eq? There isn't much info on it's use in the manual.
hey man! were you able to get the MIC and hook up the auto eq while still having the relay connected? I wasnt and I was wondering if you found a working solution, like some kind of switch or something.
i'm currently installing avh-4300 and i have few questions
do i need to do something with the amp wires if i dont have an amp?
also what do i do with mute and reverse wires black/yellow and purple/white?
and lastly do i just plug in a switch and ground it at the parking brake? or anywhere?
do i need to do something with the amp wires if i dont have an amp?
also what do i do with mute and reverse wires black/yellow and purple/white?
and lastly do i just plug in a switch and ground it at the parking brake? or anywhere?
AVH-4200 and AVH-4300 harness wiring is the same. Black/yellow (mute) and violet/white (backup camera) not used. If you don't have an amp and don't hook up a camera. Use a spdt switch to connect the green wire from you radio harness to ground. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
350Z_Al
Exterior & Interior
133
Oct 29, 2020 07:44 PM
bcoffee20
Zs & Gs For Sale
5
Nov 19, 2015 06:39 PM
Beater350z
Maintenance & Repair
4
Sep 9, 2015 03:36 PM




