Subwoofer to big for box
#1
Subwoofer too big for box
Hey guys, I just bought a Zenclosures strutbar box (single 10") and an MTX sub (http://www.crutchfield.com/p_236T551...ir=FFBrand|MTX). The zenclosures website says it will take up to 7" depth subs, and the MTX is advertised as 6 5/16". But it won't quite fit all the way in.
Anyone else have this problem?
Anyone else have this problem?
Last edited by Modrummer; 12-10-2011 at 04:14 AM.
#2
luckily I was able to fit a DC Level 4 in my zenclosures box which was surprising cause the magnet is HUGE. With that sub it does look to be tall.
You can buy a 10" MDF spacer ring that will extend it out. Also are you sure its the back of the magnet hitting? I had to dremel out the hole a little on my box in order to get the sub to fit in.
You can buy a 10" MDF spacer ring that will extend it out. Also are you sure its the back of the magnet hitting? I had to dremel out the hole a little on my box in order to get the sub to fit in.
Last edited by ari_gold; 12-09-2011 at 03:23 PM.
#3
luckily I was able to fit a DC Level 4 in my zenclosures box which was surprising cause the magnet is HUGE. With that sub it does look to be tall.
You can buy a 10" MDF spacer ring that will extend it out. Also are you sure its the back of the magnet hitting? I had to dremel out the hole a little on my box in order to get the sub to fit in.
You can buy a 10" MDF spacer ring that will extend it out. Also are you sure its the back of the magnet hitting? I had to dremel out the hole a little on my box in order to get the sub to fit in.
Thanks!