Which fuses are tied to the ignition switch?
05-21-2013, 06:12 AM
#1
New Member
Thread Starter
Which fuses are tied to the ignition switch?
I just hardwired my radar detector into the fuse panel by the clutch pedal. Having the secondary controls is as amazing as I thought, except the radar detector stays on when I turn the car off.
I wired it into the audio fuse location in the DIY below. Is there a different fuse location I could wire into that would turn the radar detector off when I turn the car off? Or is there another way to do this?
https://my350z.com/forum/audio-video...l#post10128056
(No, I'm not interested in the mirror detector hardwire as I did this for the secondary controls) Thanks in advance!
I wired it into the audio fuse location in the DIY below. Is there a different fuse location I could wire into that would turn the radar detector off when I turn the car off? Or is there another way to do this?
https://my350z.com/forum/audio-video...l#post10128056
(No, I'm not interested in the mirror detector hardwire as I did this for the secondary controls) Thanks in advance!
05-23-2013, 03:10 PM
#2
New Member
Thread Starter
To answer my question for future readers wondering the same thing; use one of the "blower" fuse spots. They are tied to the ignition switch rather than the battery, (which is always on) like the audio apparently is. It works perfectly!
Last edited by I DTW I; 05-31-2013 at 04:26 AM.
Thread
Thread Starter
Forum
Replies
Last Post
ars88
Zs & Gs For Sale
18
04-04-2016 07:52 AM
350Z Project X
Maintenance & Repair
11
10-17-2015 05:16 PM
Beater350z
Maintenance & Repair
4
09-09-2015 03:36 PM
