I am tackling my 1st stereo install, and need some help.

I am going to install a 75W x 4 RMS amp, and 10" sub, in the spare tire well in a custom box, and Kappa Perfects 6.1 in the doors.

Looking to get a good amp wiring kit, with everything needed, including rca's to the headunit, and speaker wire.
Rca length of 10 feet look to be plenty long enough
Would guess I would probably need 15 from the doors to the amp in the back (sound right ?)

Finding tons of these kits on eBay, but don't know which to get

Can someone offer some advice on a good wiring kit ?

Thanks!

 

Good wiring kits and RCA interconnects here..........

http://www.knukonceptz.com/productMa...lation%20Kits#

 

Most people with a smaller system like yours just connect the speaker wire to the disconnected wires behind the head unit rather than running wires into the doors.

 

ACP,

What amp are you going with? Are you going with the R 5 or R8?

I am going to have the same setup like yours. Wish we were closer, so we can do this together (hehe). What sub? Are you using the stock (non) HU?

Can anybody answer this for me.


I am going to install Perfect 6.1 for the fronts.

I am building a box for a Infinity Perfect 10.1. My amp will be likely a Phoenix Gold Octane-R 8.0:4

http://www.crutchfield.com/S-LtPBfsU...f=N&search=amp

I am planning to keep the nonbose HU. So do I need two LOCs? The front for the Perfect 6.1 and the back for the sub? If I decide I want to power the back speakers using the HU, do I share the same rear speakers wire (before the LOC)?.

Also, how do I bridge? What do I need? Do I just double up on the rear channels with the left and right wires and then going to the sub?

With the setup I just describe, do I get 75 watts each for the front and for the sub, I get 250watts RMS (Boosted Ted confirmed this, but I want to make sure)?


Thanks in advance.
Tony

 

i would go with the knu konceptz wires also, thats what im going to use on my jl 500.1 and US Amps 600x