My system pics (Kenwood DDX7017, JL Subs & Amps, Focal components)
Originally Posted by vics350
The box is actually a tight fit, however, I know some people that have screwed it into the plastic housing of the strut bar. I have yet to have it slide out and I've really tried to push it out and if the torque from the APS TT couldn't do it then you could only imagine how tight of a fit it is.
The box on top of my gauges is my Defi digital display which monitors EGT, water temp & oil temp.
I'll take some more pics of the door pods tomorrow and will post it then.
Thanks to everyone for the compliments.
The box on top of my gauges is my Defi digital display which monitors EGT, water temp & oil temp.
I'll take some more pics of the door pods tomorrow and will post it then.
Thanks to everyone for the compliments.
Victor,
The box is secured in the car using the existing holes from the cargo net tie downs, We used a nut-sert (steel poly Nut) in place of the holes and used some bolts to hold the box from both sides.
Nazar
The box is secured in the car using the existing holes from the cargo net tie downs, We used a nut-sert (steel poly Nut) in place of the holes and used some bolts to hold the box from both sides.
Nazar
Here is some more pictures of th ecar, You can see the Door pods a little better.
http://www.wickedcas.com/gallery/cat...3a7be70ab062a0
Nazar
http://www.wickedcas.com/gallery/cat...3a7be70ab062a0
Nazar
Thread Starter
Registered User
iTrader: (1)
Joined: Feb 2003
Posts: 2,013
Likes: 1
From: Connecticut
Originally Posted by Nazar
Victor,
The box is secured in the car using the existing holes from the cargo net tie downs, We used a nut-sert (steel poly Nut) in place of the holes and used some bolts to hold the box from both sides.
Nazar
The box is secured in the car using the existing holes from the cargo net tie downs, We used a nut-sert (steel poly Nut) in place of the holes and used some bolts to hold the box from both sides.
Nazar
Thread Starter
Registered User
iTrader: (1)
Joined: Feb 2003
Posts: 2,013
Likes: 1
From: Connecticut
Originally Posted by Nazar
Here is some more pictures of th ecar, You can see the Door pods a little better.
http://www.wickedcas.com/gallery/cat...3a7be70ab062a0
Nazar
http://www.wickedcas.com/gallery/cat...3a7be70ab062a0
Nazar
Originally Posted by Nazar
Here is some more pictures of th ecar, You can see the Door pods a little better.
http://www.wickedcas.com/gallery/cat...3a7be70ab062a0
Nazar
http://www.wickedcas.com/gallery/cat...3a7be70ab062a0
Nazar
Originally Posted by imntcrzy
Nazar, I know it would difficult to make door pods without the actual car or drivers... but can you make a pair for 6 Kx or 7 kx and 4kx mid? Your work looks nice and clean, I know I probably should look locally but was wondering.
So needless to say, Anything is possible I will look into it as we are making the new door molds.
Originally Posted by Peteski
I would be very interested in these door pods, as they are the sharpest looking I have seen to date, I will call your shop sometime
Here is the idea of what we are working on. These will be set up for 6/5/Tweet set up. They will fit up to a Focal 6/5 and tweeter will go in stock location. We will be making the whole door mold with pods integrated into them. If you can imagine it will all be one pull.
Last edited by Nazar; Aug 21, 2006 at 07:20 AM.
Registered User
Joined: Feb 2003
Posts: 238
Likes: 0
From: new york
how is the view on that kenwood durring the day? is there alot of glare? i was thinking of picking up the roadster and using this screen but im not sure how the glare would be and if i would be able to c the screen durring the day, also the way the dash is possitioned im not sure how it would be in a roadster
ne 1 have ne info on how this screen would hold up in a roadster
ne 1 have ne info on how this screen would hold up in a roadster
Originally Posted by sintaxeror
Naz,
Are those door pieces completely made from reinforced filler? How heavy are they, and how are they secured to the door panels?
FIRST POST!
Thanks,
Jay
Are those door pieces completely made from reinforced filler? How heavy are they, and how are they secured to the door panels?
FIRST POST!
Thanks,
Jay
The big door pieces you see above are being designed to become a part of the door, So when we pull the door mold it will all be one piece.
Originally Posted by 350ztoronto
are the focal 165kp2 better sounding speakers then the jl xr650 component speakers?
need help on deciding which way to go
need help on deciding which way to go
JL XR's are excellent all around speakers. We sell a lot of XRs.
Focal 165K2p Will require more power, But will give you more in depth sound quality, More Midbass, Mid and Highs. Focals are more of a True sounding speakers.
Originally Posted by vics350
Here are some pics. of my system (thanks to anyone2u) which was installed by WickedCAS of NH (some of you may know the name Nazar as he's the owner).
The system sounds incredible and the color scheme matches perfectly with my car. For those interested, here's what the setup includes:
Kenwood DDX-7017(with Sirius satellite and iPod connection)
Focal 165K2P door component speakers with midrange mounte on custom chrome silver painted door pods
Focal Access coaxial in rear stock location
Three 10" JL Audio 10W1-V2 subs in custom chrome silver fiberglass under strut bar box
JL Audio 500/1 amp for the subs
JL Audio 450/4 amp for the Focals
Optima Battery
Dynamatting on doors and trunk floor
Let me know what you think.
The system sounds incredible and the color scheme matches perfectly with my car. For those interested, here's what the setup includes:
Kenwood DDX-7017(with Sirius satellite and iPod connection)
Focal 165K2P door component speakers with midrange mounte on custom chrome silver painted door pods
Focal Access coaxial in rear stock location
Three 10" JL Audio 10W1-V2 subs in custom chrome silver fiberglass under strut bar box
JL Audio 500/1 amp for the subs
JL Audio 450/4 amp for the Focals
Optima Battery
Dynamatting on doors and trunk floor
Let me know what you think.
Thanks
