My First 350ZR install :) featuring Nazar's boxes :) pics...
Thread Starter
Sponsor
Simplicity in Sound
Simplicity in Sound
iTrader: (10)
Joined: Jan 2006
Posts: 2,792
Likes: 1
From: san Jose, CA
not really, take off the trim aroundt he shifter, and then take out the two screws on the rear sides of the center cnsole and you can lift up the center console enough to unsecure that piece 
b
b
Originally Posted by 16psibrick
it doesnt rattle there at all, sinc ehte sub fires downward, there is very litle pressure on the front cover
like i said, barely any rattles
like i said, barely any rattles
They should work for both. At highway speeds, I am *way* more than happy with the amount of bass. But true story, a guy pulled up in his tricked out SUV with his music blaring. I jumped to a rap folder, cranked it up, drowned out his bass, and made him scowl. 
.
I would suspect, a major plus to the box is less body-rattle from this kit (as it fires down and resonates). The box design is remarkable (still shaking my head from how well it came out). Though, I am sure 16psibrick's installation helped out with the results. With all that said, I would wager you would get a bit more bass thumping off your back glass, though, with the standard under bar box (based on the mind-numbing bass in my last hatchback). But you should still be very happy with this one, as well.
.I would suspect, a major plus to the box is less body-rattle from this kit (as it fires down and resonates). The box design is remarkable (still shaking my head from how well it came out). Though, I am sure 16psibrick's installation helped out with the results. With all that said, I would wager you would get a bit more bass thumping off your back glass, though, with the standard under bar box (based on the mind-numbing bass in my last hatchback). But you should still be very happy with this one, as well.
Originally Posted by rnbanjao
i like this stealth set-up too.. it fits the regular 350z too right... how do i exactly get this nazar boxes
Originally Posted by Nazar
Bing,
Excellent job as usual. Great job with the detailed pictures. It is hard to find a good installer these days and I solute you for the great work you have been producing.
For those of you wanting the ZR / Roadster / Cinvertible / Coupe Enclosures, Yes It will fit All 350Z Convertible or Coupe.
I now have them available on our website to order from.
http://www.wickedcas.com/store/produ...products_id=55
Excellent job as usual. Great job with the detailed pictures. It is hard to find a good installer these days and I solute you for the great work you have been producing.
For those of you wanting the ZR / Roadster / Cinvertible / Coupe Enclosures, Yes It will fit All 350Z Convertible or Coupe.
I now have them available on our website to order from.
http://www.wickedcas.com/store/produ...products_id=55
this should help.
Registered User
Joined: Aug 2006
Posts: 124
Likes: 0
From: Dallas
Originally Posted by 16psibrick
not really, take off the trim aroundt he shifter, and then take out the two screws on the rear sides of the center cnsole and you can lift up the center console enough to unsecure that piece
b
b
I am still learning about installs but I had a question... It looks like you put the 6.5's into the floor here. Why didn't you put them into the stock areas behind the headrests? DId you leave that area behind the headrests empty?
Originally Posted by 16psibrick
led, i am not quite sure what you mean by 6.5"s in the floor?
Wouldn't the subs drown that out?
