When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This better hold up north of 140mph. It seems way too thin around the bolt holes and the bolts might rip through. It needs some big washers I think. It's what happened to the stock one I had around 145mph.
This better hold up north of 140mph. It seems way too thin around the bolt holes and the bolts might rip through. It needs some big washers I think. It's what happened to the stock one I had around 145mph.
Bolts will not pull through, These have been well tested at high speeds
Make sure you use all the bolts also. Did you order the hardware kit with it? They have very wide attached washers.
Bolts will not pull through, These have been well tested at high speeds
Make sure you use all the bolts also. Did you order the hardware kit with it? They have very wide attached washers.
I did order the kit.
Originally Posted by Barnabas
I have taken mine 160+ with sustained speeds of 140+ for 5+min it is very secure and will not come out