FS: Don Nguyen | **Vinyl Roof Wrapping Services + Stickers/Graphics and more!**
Thread Starter
Vendor - Former Vendor
iTrader: (21)
Joined: Mar 2008
Posts: 1,355
Likes: 0
From: Irvine, CA
Tinted the tails on this C63, vinyl'd his window trim with matte black to cover up the chrome window trim, and wrapped/blacked out his amber bumper reflector.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
Thread Starter
Vendor - Former Vendor
iTrader: (21)
Joined: Mar 2008
Posts: 1,355
Likes: 0
From: Irvine, CA
Tired of white car after white car with black roofs yet? Here's a Kia Forte that I vinyl wrapped the roof in gloss black. Pretty cool little car and a nice change of pace of all the euro/white cars.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
Thread Starter
Vendor - Former Vendor
iTrader: (21)
Joined: Mar 2008
Posts: 1,355
Likes: 0
From: Irvine, CA
Vinyl wrapped the rear trunk on this Subaru with the 3M Di-Noc carbon fiber material. Took a before picture of the trunk with the holes and the after once the trunk was wrapped. Note, it may or may not show up in the pictures, but there will still be slight impressions of the holes where the vinyl is covering over.
Hopefully these pictures will answer many people's questions of how well vinyl covers holes that I've been asked.
-Don
donathon@gmail.com
Hopefully these pictures will answer many people's questions of how well vinyl covers holes that I've been asked.
-Don
donathon@gmail.com
Thread Starter
Vendor - Former Vendor
iTrader: (21)
Joined: Mar 2008
Posts: 1,355
Likes: 0
From: Irvine, CA
Tinted the headlights, tail lights, mirror lights, fog lights, and some other misc items on this ML350:
-Don
donathon@gmail.com
-Don
donathon@gmail.com
Thread Starter
Vendor - Former Vendor
iTrader: (21)
Joined: Mar 2008
Posts: 1,355
Likes: 0
From: Irvine, CA
I've had people ask if I can vinyl wrap hard tops and just how flexible my vinyl is...
Let me know if this answers your questions, and if you have any others
-Don
donathon@gmail.com
Let me know if this answers your questions, and if you have any others
-Don
donathon@gmail.com
Thread Starter
Vendor - Former Vendor
iTrader: (21)
Joined: Mar 2008
Posts: 1,355
Likes: 0
From: Irvine, CA
Vinyl wrapped the hood of this Acura RSX in the 3M di-noc carbon fiber vinyl. Don't mind the dusty marks/shadows. Forgot to clean it off before taking the pictures.
Just to be clear, since I know I'll have some people ask me if I can wrap their hoods. The material is not wide enough to wrap/do most hoods, except on smaller cars, such as this RSX. If you're interested in getting your hood wrap, measure your hood beforehand and give me the measurements of your car, so that way I can determine if it'd be possible or not.
-Don
donathon@gmail.com
Just to be clear, since I know I'll have some people ask me if I can wrap their hoods. The material is not wide enough to wrap/do most hoods, except on smaller cars, such as this RSX. If you're interested in getting your hood wrap, measure your hood beforehand and give me the measurements of your car, so that way I can determine if it'd be possible or not.
-Don
donathon@gmail.com
Thread Starter
Vendor - Former Vendor
iTrader: (21)
Joined: Mar 2008
Posts: 1,355
Likes: 0
From: Irvine, CA
Vinyl roof wrapped this R35 GTR's roof with some 3M Di-Noc carbon fiber vinyl, and also did the center of his rear spoiler.
Let me know what you guys think.
-Don
donathon@gmail.com
Let me know what you guys think.
-Don
donathon@gmail.com
Thread Starter
Vendor - Former Vendor
iTrader: (21)
Joined: Mar 2008
Posts: 1,355
Likes: 0
From: Irvine, CA
Vinyl wrapped the roof of this BMW E92 M3 in the carbon fiber 3M di-noc material.
Just to avoid any confusion, his antenna was painted matte black, not wrapped. Also, it was only placed on there temporarily for pictures, hence why you can see a gap between the antenna cover and roof in some of the pictures.
Let me know what you guys think.
-Don
donathon@gmail.com
Just to avoid any confusion, his antenna was painted matte black, not wrapped. Also, it was only placed on there temporarily for pictures, hence why you can see a gap between the antenna cover and roof in some of the pictures.
Let me know what you guys think.
-Don
donathon@gmail.com
Thread Starter
Vendor - Former Vendor
iTrader: (21)
Joined: Mar 2008
Posts: 1,355
Likes: 0
From: Irvine, CA
What finish?
Here's pictures of a white BMW E90 3 series that I vinyl wrapped the roof with in gloss black. He also had black wheels, so it'll give those who are curious how the black roof works with black wheels.
-Don
donathon@gmail.com
Here's pictures of a white BMW E90 3 series that I vinyl wrapped the roof with in gloss black. He also had black wheels, so it'll give those who are curious how the black roof works with black wheels.
-Don
donathon@gmail.com
Thread Starter
Vendor - Former Vendor
iTrader: (21)
Joined: Mar 2008
Posts: 1,355
Likes: 0
From: Irvine, CA
How about something a bit different. Here's a new Honda Insight that I vinyl wrapped the roof with in matte black.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
Thread Starter
Vendor - Former Vendor
iTrader: (21)
Joined: Mar 2008
Posts: 1,355
Likes: 0
From: Irvine, CA
Some real quick pictures. Here's some tails on an Nissan Altima that I tinted/wrapped with a red clear vinyl film:
Before:
After:
-Don
donathon@gmail.com
Before:
After:
-Don
donathon@gmail.com
Hi Don,
just curious - have you ever done rims? If so how did they come out?! Mine have some pretty flat surfaces from an '03 350z and don't look too difficult but I was wondering if you had any experience of it!
Thanks.
just curious - have you ever done rims? If so how did they come out?! Mine have some pretty flat surfaces from an '03 350z and don't look too difficult but I was wondering if you had any experience of it!
Thanks.