FS: Don Nguyen | **Vinyl Roof Wrapping Services + Stickers/Graphics and more!**
#262
Thread Starter
Vendor - Former Vendor
iTrader: (21)
Joined: Mar 2008
Posts: 1,355
Likes: 0
From: Irvine, CA
Here are pictures of the fogs that I vinyl wrapped/tinted in a yellow film.
Let me know if any of you would be interested in getting this done on your cars.
-Don
donathon@gmail.com
Let me know if any of you would be interested in getting this done on your cars.
-Don
donathon@gmail.com
#263
Vinyl roof wrapped this R35 GTR's roof with some 3M Di-Noc carbon fiber vinyl, and also did the center of his rear spoiler.
Let me know what you guys think.
-Don
donathon@gmail.com
Let me know what you guys think.
-Don
donathon@gmail.com
Did you take off the antenna or cut the vinyl to fit?
Did you apply 3m primer/adhessive?
Thanks.
#265
Thread Starter
Vendor - Former Vendor
iTrader: (21)
Joined: Mar 2008
Posts: 1,355
Likes: 0
From: Irvine, CA
Smoked/tinted the tails on this new Mercedes E class. Trimmed out the reverse/turn signal portions as well for him.
Let me know what you guys think.
-Don
donathon@gmail.com
Let me know what you guys think.
-Don
donathon@gmail.com
#267
Thread Starter
Vendor - Former Vendor
iTrader: (21)
Joined: Mar 2008
Posts: 1,355
Likes: 0
From: Irvine, CA
Vinyl wrapped the roof of this E60 BMW 550i in gloss black material.
I know almost all of my pictures of white cars, but I must admit, they do look the best on white cars. Although, I do wish cars of other colors would come by to get it done, and add a little bit more of variety, haha.
-Don
donathon@gmail.com
I know almost all of my pictures of white cars, but I must admit, they do look the best on white cars. Although, I do wish cars of other colors would come by to get it done, and add a little bit more of variety, haha.
-Don
donathon@gmail.com
#268
Thread Starter
Vendor - Former Vendor
iTrader: (21)
Joined: Mar 2008
Posts: 1,355
Likes: 0
From: Irvine, CA
Vinyl wrapped this white E92 2-door BMW 3 series's roof in gloss black vinyl.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
#270
Thread Starter
Vendor - Former Vendor
iTrader: (21)
Joined: Mar 2008
Posts: 1,355
Likes: 0
From: Irvine, CA
I may mildly regret posting these pictures, but I had some people ask me if I've done it before, and to post pictures if I do/have. Well, here are pictures of an aftermarket Mercedes C class front grill that I vinyl wrapped in the 3M Di-noc carbon fiber material.
Now note, it's not really possible...actually let me rephrase that...it's not really practical to wrap some of the grills that are out there, due to its design and shapes. However, this one is one of those exceptions.
Sorry for the pictures, I didn't have much lighting, and had to use a flash to even get the weaves to show. Let me know what you guys think.
-Don
donathon@gmail.com
Now note, it's not really possible...actually let me rephrase that...it's not really practical to wrap some of the grills that are out there, due to its design and shapes. However, this one is one of those exceptions.
Sorry for the pictures, I didn't have much lighting, and had to use a flash to even get the weaves to show. Let me know what you guys think.
-Don
donathon@gmail.com
#274
Thread Starter
Vendor - Former Vendor
iTrader: (21)
Joined: Mar 2008
Posts: 1,355
Likes: 0
From: Irvine, CA
Here are some of the pictures of the tail lights that I vinyled over this weekend. Smoked/tinted the entire tail light on this BMW E60 535i. Yes, it is a film that I use, not spray/paint/etc.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
Last edited by Don Nguyen; 12-09-2010 at 07:08 AM.
#277
Thread Starter
Vendor - Former Vendor
iTrader: (21)
Joined: Mar 2008
Posts: 1,355
Likes: 0
From: Irvine, CA
Here are pictures of the tail lights that I tinted with a red vinyl film for on this Subaru WRX. I cut out the reverse/turn light pieces for him as well.
For those who don't know what these tails looked like before I tinted it, here's a stock picture for reference.
Before:
After:
-Don
donathon@gmail.com
For those who don't know what these tails looked like before I tinted it, here's a stock picture for reference.
Before:
After:
-Don
donathon@gmail.com
#278
Thread Starter
Vendor - Former Vendor
iTrader: (21)
Joined: Mar 2008
Posts: 1,355
Likes: 0
From: Irvine, CA
Blacked out the window trim on this E60 5 series with some matte black vinyl. They were originally chrome, and the owner wanted to get rid of them, to go with a more blacked out/murdered out look for his car. Everything is done in one piece, no seam lines anywhere, even on the rear doors where it curves downwards.
I forgot to take some before/after pictures, until I was half way done, so here's the best I have of a comparison of the chrome (bottom trim) compared to the trim that I wrapped (top trim) already in matte black.
Finished result:
-Don
donathon@gmail.com
I forgot to take some before/after pictures, until I was half way done, so here's the best I have of a comparison of the chrome (bottom trim) compared to the trim that I wrapped (top trim) already in matte black.
Finished result:
-Don
donathon@gmail.com