Enjuku Racing - ER Spec Cage Nissan 350z
Thread Starter
Vendor - Former Vendor
Joined: Oct 2008
Posts: 252
Likes: 0
From: Clermont, FL
Enjuku Racing - ER Spec Cage Nissan 350z
ER Spec Nissan 350z Drift Car Roll Cage
~~THESE CAGES ARE WELD-IN, NOT BOLT IN, AND DO NOT COME PRE NOTCHED~~
You can do the X or the Nascar Style Ladder at the door.
Photo is for clarification purpose only. Actual part may vary.
Nissan 350z Roll Cage for Drift Car racing. 1.50" X 0.095 DOM Mild steel.
Main Hoop and Roof Hoop Are Wider Than most cages and hug the chassis very nice.
Interior panels must be removed
Meant to be used with factory dash bar
Windshield runners fit in between the Dash and Door
Cage Includes Diagonal, 2-Piece Crossmember For Main Hoop, Cage Plates for floor mount and boxes, also Formula D Legal Intrusion Bars.
Add more strength to your ER Spec Cage, Choose type of dimple plates when ordering.
Dimple Plate Dimensions: 24" x 6" x 1/8
AGAIN~~THESE CAGES ARE WELD-IN, NOT BOLT IN, AND DO NOT COME PRE NOTCHED~~
We recommend these be installed by a PROFESSIONAL fabricator experienced with installing roll cages. If you have any questions regarding bar placement or fitment please contact us prior to installing the cage completely.
In Stock and Ready to Ship!
$795.00
Last edited by EnjukuRacing; Dec 2, 2015 at 06:52 AM.
Thread Starter
Vendor - Former Vendor
Joined: Oct 2008
Posts: 252
Likes: 0
From: Clermont, FL
Thread
Thread Starter
Forum
Replies
Last Post
Nabush
Autocross/Road
56
Jul 26, 2018 08:42 AM