Stoptech ST-22 rear caliper pic
#1
Registered User
Thread Starter
Stoptech ST-22 rear caliper pic
There haven't been too many pics of these floating around yet. Just finished the install yesterday. Actually, I spent most of the day bleeding all four brakes. ST-22 rear 2-piston caliper with 328x28mm rear rotor. Up front I put the ST-40 4-piston caliper with the 332x32mm rotor.
The wheels in the pic are 18" Nismo. Weight of the entire Stoptech system is 107lbs vs exactly 100lbs for the stock system. This includes all lines and pads. Most of the weight gain is due to the larger rear rotor. Weight gain in front was only 0.5lb per side. Very impressive.
The wheels in the pic are 18" Nismo. Weight of the entire Stoptech system is 107lbs vs exactly 100lbs for the stock system. This includes all lines and pads. Most of the weight gain is due to the larger rear rotor. Weight gain in front was only 0.5lb per side. Very impressive.
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 06:19 AM
350Z_Al
Exterior & Interior
133
10-29-2020 07:44 PM