I plan on getting just wheels for now, but my alignment settings are near its limits already. I plan on using 245 front and 275 back. Will gettings these wheels and tires throw off my camber, toe, and other settings? I'm just asking because we can't really adjust anything on our cars besides toe.

Also when gettings a 1-.75" drop how much does it usually throw camber and toe off? I know it can only be judged by a case by case basis, but is it 1 degree or less or 2 degrees?

Thanks!!!! Your comments will let me know if I should buy a camber kit before I put wheels on.

 

yo yea man i have the same rims and drop, it gives me a negative camber heres a pic ill have better pics later but you would need a camber kit, unless you wanna mess up some expensive tires

http://www.xanga.com/home.aspx?user=SaaLa_GaaNaH_GaA

 

If you only drop it about an 1" you should be able to get it within specs by only getting an alignment. I have the Tein S-Techs and the tech was able to get it within specs by just doing an alignment.

 

What if I get the rims and no drop yet? That's what i orginally meant.

 

Then it won't do anything to the alignment.

 

No issues. That's how I roll.