Hello MY350Z.com
03-22-2007, 12:35 PM
#1
Sponsor
GTSPEC
GTSPEC
Thread Starter
Join Date: Feb 2004
Location: New York
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Hello MY350Z.com
As most of you may or may not know, GTSPEC has been in the business of strengthening the 350Z/G35 for quite some time. It has been our experience that while our parts have been successful sellers we have not had the channels to offer help with fitment or to answer specific questions. We do not sell to the public so please take the time to ask questions revolving around pricing/availability with one of our many vendors on this forum. We use our own shop Z's and G's with various FI upgrades to figure out what parts are needed and have worked with many of the most respected shops in the community to continue to provide bracing that will universally fit regardless of which aftermarket modifications you may have done. We hope to use MY350Z.com to answer questions as well as get feed back on new items we will be developing.
We would like to thank the Z community for its continued support and look forward to providing you with future products that continue to exceed your expectations.
We would like to thank the Z community for its continued support and look forward to providing you with future products that continue to exceed your expectations.
03-22-2007, 06:21 PM
#2
Registered User
iTrader: (43)
Join Date: Jun 2006
Location: Lone Star State
Posts: 2,757
Likes: 0
Received 0 Likes
on
0 Posts
I love your 350Z products. I have your front lower, rear lower & rear lateral arm braces. I will be purchasing your mid-chassis reinforcement brace sometime this year.
03-22-2007, 08:35 PM
#4
Registered User
iTrader: (18)
Join Date: Jun 2004
Location: New Mexico
Posts: 3,285
Likes: 0
Received 0 Likes
on
0 Posts
Been wanting to add some of your parts but was always uncertain of what would fit. Some of my mods that might get in the way are the Vortech SC, NISMO exhaust and Fast Intentions HFC's. What braces can I use of your without modding? Where would be the best place to order from? Thanks
03-23-2007, 05:12 AM
#6
Registered User
iTrader: (43)
Join Date: Jun 2006
Location: Lone Star State
Posts: 2,757
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Barzten1
Been wanting to add some of your parts but was always uncertain of what would fit. Some of my mods that might get in the way are the Vortech SC, NISMO exhaust and Fast Intentions HFC's. What braces can I use of your without modding? Where would be the best place to order from? Thanks
http://www.partshippers.com/index.ph...ath=96_109_153
03-23-2007, 08:09 AM
#7
Sponsor
GTSPEC
GTSPEC
Thread Starter
Join Date: Feb 2004
Location: New York
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Bartzen1,
With your current mods I see no reason our current braces will not fit 100%. We have quite a few Z's here with GReddy, JWT and Vortech kits and all are running our braces. To compensate for plenum spacers, our strut bars now come with spacers. In addition to that our real lateral bars will incorportate mounting points for the AAM type-2 fuel system so people who have chocen that upgrade no longer need to sacrifce handling for fuel. Our current front lower tie bar will clear stock, PE, APS and Greddy oil pans. The new revised version will fit with all of the aforementioned parts as well as AAM's and JWT's oil pan spacer. WE own lots of Nissan's here and are soon to be rereleasing all of our bars to be universal in regards to the consumer's chosen path of upgrades. Please contact our vendors: intense motorsports, Z1 Auto, partshippers, thnmototrsports, forgedperformance, function tuned etc.
They may have specific hands on knowledge when it comes to installing braces with mods that we may not have personally experienced.
With your current mods I see no reason our current braces will not fit 100%. We have quite a few Z's here with GReddy, JWT and Vortech kits and all are running our braces. To compensate for plenum spacers, our strut bars now come with spacers. In addition to that our real lateral bars will incorportate mounting points for the AAM type-2 fuel system so people who have chocen that upgrade no longer need to sacrifce handling for fuel. Our current front lower tie bar will clear stock, PE, APS and Greddy oil pans. The new revised version will fit with all of the aforementioned parts as well as AAM's and JWT's oil pan spacer. WE own lots of Nissan's here and are soon to be rereleasing all of our bars to be universal in regards to the consumer's chosen path of upgrades. Please contact our vendors: intense motorsports, Z1 Auto, partshippers, thnmototrsports, forgedperformance, function tuned etc.
They may have specific hands on knowledge when it comes to installing braces with mods that we may not have personally experienced.
Last edited by GTSPEC; 03-23-2007 at 09:51 AM.
Trending Topics
03-23-2007, 08:43 AM
#9
Sponsor
GTSPEC
GTSPEC
Thread Starter
Join Date: Feb 2004
Location: New York
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
The owner is Mike DelaCruz and trust us...posting pics of his car wll in no way offend him 
We do manufacture Wings and specifically we made the one seen on that car. Those items are special order and must be ordered thru our vendors.
I have some photos of the diffenet styles that we have available as of now. We do not have plans to manufacture more at this time so please contact your vendor if interetsed.
We do manufacture Wings and specifically we made the one seen on that car. Those items are special order and must be ordered thru our vendors.
I have some photos of the diffenet styles that we have available as of now. We do not have plans to manufacture more at this time so please contact your vendor if interetsed.
03-23-2007, 09:39 AM
#15
Originally Posted by GTSPEC
We do manufacture Wings and specifically we made the one seen on that car. Those items are special order and must be ordered thru our vendors.
