TuscaniJon

iTrader: (2)

ok I think I've got it, Install the bolts in the spring bucket...? The only thing that confuses me is in some of these pics is they have the camber arm in there to, and that is adjustable as well so does that need the SPC bolt as well?

https://my350z.com/forum/brakes-and-suspension-diy/185737-spc-toe-bolt-install-write-up-with-pics-courtesy-of-protocav-3.html

Checkmate58

iTrader: (11)

The SPC bolt is to correct your toe setting. You only need those two bolts. Everything else requires the stock bolts (ie. stock bolts+camber arms).

--Sam

TuscaniJon

iTrader: (2)

so once the tow is fixed, I can run less camber also... correct?

Checkmate58

iTrader: (11)

Yeah since you already have camber arms, adding the toe bolts should help you get all back into specs again. Of course I wouldn't go with 0 camber though.

--Sam

TuscaniJon

iTrader: (2)

sounds good, thanks for the help guys!

Sk8fe

iTrader: (5)

Still have those extra SPC toe bolts? If so PM me.

https://my350z.com/forum/brakes-and-suspension/276701-kinetix-race-rear-traction-arms-keep-em-or-toss-em.html