Special Edition StopTech's?
#154
Z + Rear Seat
iTrader: (3)
Join Date: Jun 2005
Location: St.Pete,FL
Posts: 1,642
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RudeG_v2.0
-I hope it's not too far in the design process to consider this, but I'm hoping the rear rotors of the special edition kit are not larger than 13" so that drag wheels with slicks can be mounted at the rear. If this is not already in your design plan, would you consider making a version for the drag racers???
I don't have the wheels or the BBK yet... I was searching for this information when I ran across this thread. It seems like there's a slight lull waiting for StopTech to answer, so I thought I'd ask here.
#155
でたらめ検出器
iTrader: (1)
Originally Posted by __jb
Will the StopTech 12.9 inch rotor with a 2 piston (ST22) caliper fit inside a 15 inch Weld Racing Pro Star 96-Series Wheel? It sounds from your post like it will.
I don't have the wheels or the BBK yet... I was searching for this information when I ran across this thread. It seems like there's a slight lull waiting for StopTech to answer, so I thought I'd ask here.
I don't have the wheels or the BBK yet... I was searching for this information when I ran across this thread. It seems like there's a slight lull waiting for StopTech to answer, so I thought I'd ask here.
When I'm ready to get a BBK, I'm just going to call them.
#156
New Member
iTrader: (5)
Originally Posted by J Ritt
After nearly 5 years with the company, I am no longer with StopTech. Therefore, I will have no more input on this issue! Sorry I can't help.
Jeff
Jeff
#157
New Member
Thread Starter
iTrader: (4)
Join Date: Jun 2002
Location: Charlotte NC
Posts: 1,115
Likes: 0
Received 0 Likes
on
0 Posts
Wow, Jeff. I remember reading every one of your posts because of all the research I did before I bought my BBK. Did you leave Stoptech due to its acquisition by Centric? Oh, I guess this is a bit OT, but what the hell...this thread's gone dead anyway.
Good to see another old-timer here!
Officially, I got laid off. The reality was that I wasn't exactly seeing eye-to-eye with the new ownership on the direction the company was taking. It was definitely time for us to part ways, and I'm feeling relieved to be off on a new endeavor.
I am going to stay in the industry, and I'll definitely be working on some great products for the 350Z. I will also do everything in my power to create another customer service experience similar to the one during my tenure at StopTech.
Last edited by J Ritt; 03-20-2008 at 08:41 PM.