i just got a coilover recently. question, do i need to install rear camber arm? what else are needed? toe bolt? use the factory one or aftermarket? what about the front? camber? thanks bro.

 

If you go lower than .8 inches, GENERALLY, you may need rear camber arms and toe bolts.

 

What coilovers did you get? How low is the car? What wheels are tires? Those answers will basically determine what else you need

 

^ +1. Personally I'd go ahead and get the adjustable camber front and rear plus the toe bolts. This way you can be prepared for any adjustments needed in the future. Small price to pay in the long run.

 

i got tein basic, my car is pretty low now, i would say about 0.5inch left from fender to tire, i have 19 hre with 265 30front n 305 30rear, so i should get front and rear camber arm and toe bolts? is there any specific brands are good or all brands are almost the same? what should be in the front and rear camber kit? like bolts? why are so many people have the rear camber arm only but not the front. thx bro

 

yes I would recommend you getting from adjustable a arms and rear camber/toe kit. I'll pm you now

 

You could go with SPC all the way. Great product. But there are plenty of other great companies also. Some venders just carry one brand, but you shouldn't get robbed on adjustable alignment kits. Most charge the same.