abs engaging too early
Registered User
Joined: Nov 2007
Posts: 119
Likes: 0
From: Temecula, CA
Originally Posted by kevin8086
under the hood there is a fuse block and there is one large fuse that actually has 3 fuses integrated 2 abs and 1 ign. i did use electrical tape for the time being to not allow the prongs for the 2 abs fuses to touch but allowing the ign prong to touch. I will be looking to see if there is a 40amp replacement at a parts store so i can pull the 3 fuse block out and run just the 40 amp for the ign. if you look on the cap it will show abs, abs, ign
30 30 40 it has a clear cap that can be removed. you can also just break the 30 amp links for the abs but leave the ign one alone and that will also work but i chose not to.
30 30 40 it has a clear cap that can be removed. you can also just break the 30 amp links for the abs but leave the ign one alone and that will also work but i chose not to.
Registered User
Joined: Oct 2003
Posts: 984
Likes: 0
From: Marietta, Georgia
Careful about publically exposing safety modifications to the NET as mods which delete or modify ABS/Air Bags, change brakes/suspension could be insurance fraud if the vehicle is used on street.
Don't admit things to the world or courts system, GUILT especially with a permanent record.
Don't admit things to the world or courts system, GUILT especially with a permanent record.
Thread
Thread Starter
Forum
Replies
Last Post
