Read anyone with tanabe nf210s
I have the springs ordered and I'm looking at a set of rims I want and they are 19sx9.5 in the front and 19x10 in the rear anyone have these springs and forsee problems with rubbing or fitment issues?
Belated reply: Fitment is fine.
Mathfuntime: I'm running 255 in the rear. Stock wheels are +33, with a 25mm spacer,
which makes it a +8 offset. (255/2)-8 = 119.5mm between my hub and fender, which ended up rubbing a little.
You will have (275/2)-20 = 117.5mm between your hub and fender, only a 2mm difference, so you may rub slightly as well.
Mathfuntime: I'm running 255 in the rear. Stock wheels are +33, with a 25mm spacer,
which makes it a +8 offset. (255/2)-8 = 119.5mm between my hub and fender, which ended up rubbing a little.
You will have (275/2)-20 = 117.5mm between your hub and fender, only a 2mm difference, so you may rub slightly as well.
Last edited by My350P; Oct 10, 2008 at 05:47 AM. Reason: Mistake!
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM
Tochigi_236
Feedback & Suggestions for Our Forum
8
Sep 27, 2015 03:40 PM



