Installed Tein Basics experiencing rear spring type noise - Not clicking.
#1
Registered User
Thread Starter
Join Date: Nov 2004
Location: Dallas/Ft Worth
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Installed Tein Basics experiencing rear spring type noise - Not clicking.
I installed the tein basics I had all new parts on for the bushings, upper mounts , even gaskets etc...Torqued to spec. when I drive really slow 5-20mph I hear this weird vibration loose spring kind of noise. I checked the rear springs and they are completely seated correctly in the seat. I thought it was alignment so I obviously got it aligned and the specs are perfect. I have kintex rear upper camber arms. Has anyone had this if so did you fix it? Any suggestions? This is for a G35 but since the suspension is exactly the same I thought maybe my Z fellow members can shed some insight on this.
#2
New Member
iTrader: (11)
Join Date: May 2007
Location: IL
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
Assume you done every thing right, just drive around, the sound will go away eventually. At least in my case it took almost a month.
edit: the noise occurs at a really very low speed 5-10 mph just like yours.
edit: the noise occurs at a really very low speed 5-10 mph just like yours.
Last edited by galant350z; 12-01-2008 at 01:53 PM.
#3
Registered User
Thread Starter
Join Date: Nov 2004
Location: Dallas/Ft Worth
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
well its been over 3 months and its still there. It really sucks. I can't figure out if its just the speaker cover behind the rear window or something suspension related. It sounds like its coming from the top of the springmounts somewhere.
#6
Registered User
Thread Starter
Join Date: Nov 2004
Location: Dallas/Ft Worth
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
didn't think about the sway bars, I will check into it. The end links look fine. the sound comes at low speeds with straight driving. Would the sway bars make noise going straight?
Trending Topics
#8
Registered User
iTrader: (6)
Join Date: Dec 2007
Location: dallas, texas
Posts: 808
Likes: 0
Received 0 Likes
on
0 Posts
i have that noise as well but i am on cut springs...and i know one of my endlinks is loose due to me stripping the thread...but i do remember stumbling across a thread where they would hear a clunking noise and someone suggested it might be the endlinks...
sorry i am not of much help...but thought i would just share my experience
sorry i am not of much help...but thought i would just share my experience
Thread
Thread Starter
Forum
Replies
Last Post
seagrasser
Zs & Gs For Sale
6
10-11-2015 03:27 PM