Ordered the stage 2 kit.. I've done rotors n pads many times before, but never replaced the lines.

Do I really need to use these new lines that came with the kit? or will my stock lines be fine?

I'd rather not be messing with the lines and bleeding the system since I've never done it before.

 

you don't have to do the lines. the purpose of stainless steel lines is so when you brake, the hose doesn't stretch. when the hose stretches, it cause the brake pedal gets softer. if your current lines are in good condition, you don't need to replace the lines.

if you track your z (or plan to), replacing the lines is a good idea. if you're uncomforable changing the lines, you can do the pads and rotor yourself and take it to a shop to change the lines. if you do this route, keep in mind that you don't have to take it to a tuner shop. any auto service or repair shop can do this. just make sure they have competent mechanics and you should be good. you may save a buck or 2 this way. make sure to shop around for some prices...

 

buddy of mine put this same kit on his g35 and man that thing stops on a dime..will be getting the same one for my z.

 

PM me for the price, I can get you one

 

Not replacing what is now the weakest link is

 

im going this route in a few months when my pads need changing might as well do the rotors and lines as well.