Guys, need help on suspension setup, need advice!

I going to install the Tokico HP shocks w/Tanabe GF210 spring, since this setup lower more than 1", needed to adjust to stock spec. without sacrifice the tires.......do i need to get the SPC rear camber arm? or just the toe bolts kit? or BOTH?

runnin with
18 x 8.5 F 25+ > 245/40/18
18 x 9.5 R 30+ > 275/40/18

please advice, tks so much !

 

Are you running stock wheels?

 

runnin with
18 x 8.5 F 25+ > 245/40/18
18 x 9.5 R 30+ > 275/40/18

 

only way to know is put the parts on your car, bring it to an aligment place, and see where things end

or buy the rear camber and toe kit, install it with your springs/struts, bring it to the alignment place, and you'll know in advance that they can adjust it to spec