Settling on new springs
11-09-2011, 09:36 AM
#1
New Member
Thread Starter
iTrader: (1)
Join Date: Jul 2011
Location: MSP, MN
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Settling on new springs
I just bought myself a set of Tanabe GF210 springs (along with everything else i need for chamber/toe adjustment).
Here is my issue: I will have everything next week, the week before I will park the Z for winter
If I install the springs, drive for about 200 miles and then park it for 5 months will this cause any issues with the "normal" or "expected" settling?
I am not sure if it is bad to just let new springs sit with a load on them without any extension or compression action for 5 months.
I have found the thread below, good tips:
https://my350z.com/forum/2003-2009-n...r-storage.html
Here is my issue: I will have everything next week, the week before I will park the Z for winter
If I install the springs, drive for about 200 miles and then park it for 5 months will this cause any issues with the "normal" or "expected" settling?
I am not sure if it is bad to just let new springs sit with a load on them without any extension or compression action for 5 months.
I have found the thread below, good tips:
https://my350z.com/forum/2003-2009-n...r-storage.html
Last edited by RileZ33; 11-09-2011 at 01:00 PM. Reason: found storing post
11-09-2011, 09:49 AM
#2
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
Install them, drive and align after winter. It will not hurn them anymore and less if you wait.
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 06:19 AM
