Not holding alignment?
Hey guys,
I got an alignment few days ago, put the toe well within/below oem specs, but left camber at around -2.0 Weird thing is, it drove fine a day or two, but the car still seems to "lose" grip when going over the road reflectors, and the steering wheel vibrates a little. What could be the reason for this? I asked the alignment guy to check the bushings while he was under the car and he said everything looked good. I have rear camber kit only. My front tires are messed up btw, front right one is cracking/old, front left is bald, and they are not the same brand. Thanks
I got an alignment few days ago, put the toe well within/below oem specs, but left camber at around -2.0 Weird thing is, it drove fine a day or two, but the car still seems to "lose" grip when going over the road reflectors, and the steering wheel vibrates a little. What could be the reason for this? I asked the alignment guy to check the bushings while he was under the car and he said everything looked good. I have rear camber kit only. My front tires are messed up btw, front right one is cracking/old, front left is bald, and they are not the same brand. Thanks
How long has it been lowered , what bushing have been replaced, why don't you get a fresh set of tires, how low is the car ( i bet 1.25 inch front drop) and so on and so forth.
Thread
Thread Starter
Forum
Replies
Last Post
350Z Project X
Suspension
9
Oct 10, 2015 09:23 AM








