Eibach Spring owners..
#1
Registered User
Thread Starter
Join Date: Feb 2003
Location: Dallas
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Eibach Spring owners..
Hey guys. Do you have Camber adjuster? IF no, are your tires wearing out uneven? I just orderd one form COZ at ConceptZperformance ( great people by the way) and I'm contemplating if I need to buy this camber kit or not. Any info would be appreciated..
#2
Twisty addict
iTrader: (6)
Join Date: Jun 2002
Location: Upper Nor_Cal
Posts: 2,427
Likes: 0
Received 0 Likes
on
0 Posts
It all depends on your car. Some could get aligned within spec without adjusters, some couldn't (like mine) and some people are just accepting the alignment as close as they can get it. Without proper adjustment the tires will wear on the inside.
Do the alignment first then buy if needed.
Do the alignment first then buy if needed.
#6
Sponsor
Performance Nissan
Performance Nissan
iTrader: (11)
I will be running and front and rear camber adjustment parts special anounced Monday... Including our race teams Upper Control arms and stillen rear camber and toe arms....
back on topic... i have the eibach springs on my car... I just alighned toe after install... i run my tires on my LMGT4's at 30PSI cold...
no un-even tire wear after 8000 miles and 2 track events...
I am going to be putting on a coil over suspension and running clost to full slam.. and will not be bringing my camber to any type of close to 0 or stock spec.. i look to run -3 / -4 camber front and rear...
HOLY WHEEL CAMBER BATMAN!
I want to grab corners
back on topic... i have the eibach springs on my car... I just alighned toe after install... i run my tires on my LMGT4's at 30PSI cold...
no un-even tire wear after 8000 miles and 2 track events...
I am going to be putting on a coil over suspension and running clost to full slam.. and will not be bringing my camber to any type of close to 0 or stock spec.. i look to run -3 / -4 camber front and rear...
HOLY WHEEL CAMBER BATMAN!
I want to grab corners
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 06:19 AM