HKS LS+,Hotchkis Sways, and Stillen Camber Kit+Toe Arms..
#4
Registered User
Thread Starter
iTrader: (1)
Join Date: Dec 2003
Location: Irvine, CA
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: Re: HKS LS+,Hotchkis Sways, and Stillen Camber Kit+Toe Arms..
OK who installed HKS LS+ Here and knows how to adjust stiffness?? which way Do i turn?? Just wanted to make sure...
THanks...
THanks...
#6
New Member
iTrader: (2)
Clockwise = stiffer
Counter clockwise = looser
There are 30 available stiffness settings on the LS+. I would tighten to maximum and then count the clicks counter clockwise to get to the desired setting just to be sure you are running at the desired setting all the way around.
Nice set up! I am considering the Hotchkis sways myself to complete my suspension! Let us know how you like it!
Counter clockwise = looser
There are 30 available stiffness settings on the LS+. I would tighten to maximum and then count the clicks counter clockwise to get to the desired setting just to be sure you are running at the desired setting all the way around.
Nice set up! I am considering the Hotchkis sways myself to complete my suspension! Let us know how you like it!
Trending Topics
#11
Registered User
Thread Starter
iTrader: (1)
Join Date: Dec 2003
Location: Irvine, CA
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
side view of front ...
The picture is just initial set up... Just installed the coilovers, sways are set to middle stiffness and stillen rear camber+toe are going to be adjust after an alignment sometimes next week...
*The ride queality is awesome... its worth it of what i paid for and with sways, i can feel the differences... So nice... and thanks again Eric and Adam at "STREET IMAGE"...
PS: Eric, I need to raise the rear for sure next week... damn its so low.... lol...
*The ride queality is awesome... its worth it of what i paid for and with sways, i can feel the differences... So nice... and thanks again Eric and Adam at "STREET IMAGE"...
PS: Eric, I need to raise the rear for sure next week... damn its so low.... lol...
#13
New Member
iTrader: (10)
Consider running the rear bar stiffer then the front since you went with a setup that transfers quite a bit of roll stiffness to the front. I'm rather taken aback that the rear springs are progressive
HKS LS+
496/440 F+58% R+29%
transfers 29% roll stiffness to the front
HKS Hypermax II
504/504 F+61% R+43%
Transfers +18% to front
Love your rims, nice choice for your car.
HKS LS+
496/440 F+58% R+29%
transfers 29% roll stiffness to the front
HKS Hypermax II
504/504 F+61% R+43%
Transfers +18% to front
Love your rims, nice choice for your car.
#14
Registered User
iTrader: (16)
Join Date: Nov 2003
Location: cali
Posts: 2,669
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: Re: HKS LS+,Hotchkis Sways, and Stillen Camber Kit+Toe Arms..
Originally posted by fluxg35
HKS LS+ pictures
HKS LS+ pictures
i have mine set at 20 f and 19 r.... i would recommend starting in the middle and go from there...peace
#15
Registered User
Thread Starter
iTrader: (1)
Join Date: Dec 2003
Location: Irvine, CA
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: Re: Re: HKS LS+,Hotchkis Sways, and Stillen Camber Kit+Toe Arms..
I just set up the at 15f and 15 r... I'm going for test drive... and prob i'm gonna raise the rear height to 1 or 1/2 inch this saturday...
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 06:19 AM
ars88
Zs & Gs For Sale
18
04-04-2016 07:52 AM