I want a fully adjustable suspension. I have the stillen toe and camber kit, but like I said on the main post the camber is still very limited, and the bolts al503 told me to get only gives me 6 degrees (-3.0 to +3.0) more camber but I need almost 10 degrees more. Six degrees would be good for an inch drop (with a toe and camber kit) but if you went 1.5" drop or more then its not enough. My car sits with a 1.75" drop. So, I'm waiting to contact 350evo to see what neat kit they made for this problem.
Thanks for all of your input.

 

del105

i dont want to speak for him but i think the point rayden is making is that he has both the camber and "toe"/radius arms that you (and me for a matter of fact) thought was a completely adjustable suspendion, and it is not enough adjustability (is that a word?) required for his drop needs

the arms he has PLUS toe cames and/or the new 350evo solution appears to have his answer

pp

 

Caster is a term applied to the front so what, the fact is if you adjust the radius rods to control toe you get caster change as a fundimental design of the suspension. If you've ever done a suspension install yourself you know full well how all the various connecting part's have a enormous amount of flex at the piviot points. That is the reason EVO350 offer's a $1500 suspension bushing system to kill that off. If it was a good idea to adjust toe at that location Nissan would have put it their, but they didn't did they.

You can say your right I'm wrong all you want, it changes nothing.

http://www.specprod.com/TECH_DIR/C_T..._2.HTML#Caster

 

I wasn't going to try and correct him on that and start a I'm right and your wrong war, but you did it for me .

 

Rayden,

How low is your car in the pic attached to your post, 1.75"?

 

At that time 1.5"rear and 1.25" front... it was even in the front and rear but I lost a lot of weight (fiberglass hood and fenders , light weight battery) in the front and didn't think about it messing up my ride height.....didn't really think it would cause me to gain .25" in the front

 

Caster is a pointless measurement on rear wheels it means nothing for the way a car handles. Rear wheels do not pivot.

 

To answer my own question almost six years later lol.
SPL PRO rear toe arms / it gets rid of mid link to make the toe fully adjustable. They have two versions ,one for a true coilover and the other for the guys that need the spring in the mid link.

 

good to a point, too much and you cant get any traction for acceleration, might be nice on the turns though.