Notices
Cleaning & Detailing Washing, waxing, cleaning, caring.

Best way to dry the car?

Thread Tools
 
Search this Thread
 
Old Dec 25, 2002 | 07:49 AM
  #21  
GATORZ's Avatar
GATORZ
Registered User
iTrader: (17)
 
Joined: May 2002
Posts: 292
Likes: 0
From: USA
Default

Leaf Blower is the ticket. No touch, No swirl, No Problem. Plus it gets all those places that the water keeps running out of for the next 2 days.

Dan
Reply
Old Dec 25, 2002 | 03:58 PM
  #22  
bhobson333's Avatar
bhobson333
Registered User
 
Joined: Aug 2002
Posts: 1,025
Likes: 0
From: Raleigh, NC
Default

I thought about using the leaf blower as others (including Sal)have recommended, but the dust/dirt factor turned me off. You're not only blowing air, you're blowing around and onto your car any dust in the area! I tried it anyway as an experiment on my older car & I just seemed to blow droplets around on the paint, not off the car! Maybe I just needed practice. (Oh, BTW: someone warned before, DON'T use a gas blower, oil droplets may come out!)

I bought some 100% cotton towels, but I was completely turned off by the lint they left, and by the fact that it took two LARGE towels to dry the car. I asked for and got a Big Blue Towel for Christmas and I'm hoping it will be the answer, though the blade sounds promising as a first step.
Reply
Old Dec 31, 2002 | 11:34 AM
  #23  
Jetpilot718's Avatar
Jetpilot718
Registered User
 
Joined: Dec 2002
Posts: 2,136
Likes: 0
From: Queens, NYC
Default heh!

Originally posted by captj3
The leaf blower is what I use.Electric one it leaves no marks at all it just annoys the neighbors to bad.Otherwise it works great.

Good, i thought I was the only one! And yes, the neighbors look at ya funny... maybe you could move by me so it doesnt look as bad! lol
Reply
Old Dec 31, 2002 | 03:37 PM
  #24  
MannishBoy's Avatar
MannishBoy
350Z-holic
Premier Member
iTrader: (1)
 
Joined: Jun 2002
Posts: 5,282
Likes: 0
From: Nashville
Default

Originally posted by wfd157
The absorber is where it's at! And for only like $10!
Second that motion. I've used one of these things for several years, and it is still in good shape and works well. Holds a lot of water for its size, and wrings out easily. Soft, with no stitches. Just roll it up and throw it back in its little plastic tube when done.
Reply
Old Jan 4, 2003 | 07:31 AM
  #25  
WellsA's Avatar
WellsA
Registered User
 
Joined: Nov 2002
Posts: 106
Likes: 0
From: DFW, TX
Default

Leaf blower is the only way to go! I wash the car outside then pull it into the garage to blow it dry. Works great!
Reply
Old Jan 4, 2003 | 10:37 PM
  #26  
spf4000's Avatar
spf4000
New Member
 
Joined: Aug 2002
Posts: 2,419
Likes: 0
From: SF, freezing my @ss off
Default

Originally posted by rocknrice
i use the water blade also but find that i need to use an artificial chamois to complete the job. Am I the only one with a blade that has to do this? Just curious, maybe I'm doing something wrong.

I'll give the big blue a try. Is it available only online through the site?

rock on
I encounted the same problem. I still need to finish off the car with a regular chamois. But it still saves time over drying the car with a chamois alone.
Reply
Old Jan 6, 2003 | 11:34 AM
  #27  
mcduck's Avatar
mcduck
Registered User
 
Joined: Jul 2002
Posts: 4,052
Likes: 1
From: Charlotte, NC
Default

To date, I have used nothing but good ole American 100% cotton towels.

I have not removed the threads... just careful to only use the center of the towel to dry and cycle through 3 or 4 during the drying process. Lint residue is almost zero after the towels have been washed once or twice.

That said, I will likely order some Big Blue Towels in the near future. Have heard nothing but good things about them... just have not gotten around to ordering any yet...
Reply
Old Jan 6, 2003 | 11:48 AM
  #28  
igyz's Avatar
igyz
Charter Member #25
 
Joined: May 2002
Posts: 38
Likes: 0
From: Las Vegas
Default IMO

use the Big Blue Towels, the large one will dry your entire car and you'll never have to squeeze it once. After you're finished rinse it off and let dry.
Reply
Old Jan 6, 2003 | 01:59 PM
  #29  
Wooderson's Avatar
Wooderson
Registered User
 
Joined: Dec 2002
Posts: 9
Likes: 0
From: miami
Default

Dumb question maybe, but what would you recommend for those of us who live in condos on the beach and cannot wash our own cars. Are you saying, do not trust any detailers, or what?
Reply
Old Jan 6, 2003 | 03:13 PM
  #30  
MannishBoy's Avatar
MannishBoy
350Z-holic
Premier Member
iTrader: (1)
 
Joined: Jun 2002
Posts: 5,282
Likes: 0
From: Nashville
Default

I don't trust anybody to wash my cars, but that's just me. I'm sure there are many great detailers. I'm just too cheap to pay them when I enjoy it (up to a point) anyway
Reply
Old Jan 8, 2003 | 06:16 AM
  #31  
RobertL's Avatar
RobertL
Registered User
 
Joined: Jan 2003
Posts: 367
Likes: 0
From: Southern California
Default Re: Best way to dry the car?

Originally posted by Ricky
Okay so far I've only tried this one way since I was told it miminizes scratches. My main concern is NO tiny swirl microscratches. Due to the fact the car is super black. So far I've been using a shamie *however you spell it*. What I do is I put it on the car, and drag water off. It absorbs some of it, but spreads it a lot, so by the time I'm done with one area, the rest of the car is dried and has water marks! If I do a little to each area, by the time I do a full circle around the car, the place I orginally started has water marks. Can't use a towel, so what else is out there to absorb quickly, and NO scratches? Or should I just let the watermarks come, then end up detailing the car or using a glossy towel *those special expensive ones?*

Thanks!
Keep ringing the chamie. Eventually you will find that when you get off all the water once go over the car again with the chamie being damp, but keep ringing it out. Get that water out of it.

My father taught me that trick. He grew up with all black cars and another thing is dust it daily before the drive!
Reply
Old Jan 8, 2003 | 06:18 AM
  #32  
RobertL's Avatar
RobertL
Registered User
 
Joined: Jan 2003
Posts: 367
Likes: 0
From: Southern California
Default

Originally posted by GATORZ
Leaf Blower is the ticket. No touch, No swirl, No Problem. Plus it gets all those places that the water keeps running out of for the next 2 days.

Dan
Dust Dust. The leaf blower maybe in the engine compartment after gunking it or something to get the water out of the hard to reach areas.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
etkms
Engine & Drivetrain
29
Jun 19, 2022 06:30 PM
roadmax
Exterior & Interior
3
Sep 12, 2015 05:55 PM




All times are GMT -8. The time now is 04:35 AM.