Well I am switching from Zaino to 3M and I am using the Zaino ZPC with a random orbital to get rid of the old Zaino and clean up the paint. (cloudiness everywhere). So far so good on the ZPC. My help is on applying the 3M Wax and Hand Glaze Show Car Finish.

Here is what I have.

1. ZPC using a orange pad and a water bottle for misting the pads.
1. 3M Liquid Wax (39026)
2. 3M Hand Glaze Show Car Finish (39007)
3. Random orbital with a White polishing pad.
4. Z-6 and DF Towels.

After I am done with the ZPC, I Z-6 the entire car and I am ready for what?

Do I apply the Hand Glaze or the Wax by hand or by orbital. Which one is first? Hand or by Orbital?

Thoughts?

 

I'm not an expert on Hand Glaze but I will relate my limited experience with it.

Don't bother putting in on. When they called it Hand Glaze, they weren't kidding. I tried using it and taking it off with the PC and it would not come off. I had to hand rub it to get it off! IIRC, I had to SMR that car again to get the glaze off.

 

Thanks, my paint is still highly shiny from the ZPC, I will just use the Liquid 3M wax. I will apply by hand.