2004 Crossfire & HD Uno Testing
#1
Vendor - Former Vendor
Thread Starter
Join Date: Jan 2008
Location: Connecticut
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
2004 Crossfire & HD Uno Testing
This detail spanned 2 days and about 9 hours.
Wash
Poorboys Slick and Suds - Foamed
Sheep Skin Wash Mitts (Paint)
Microfiber Wash Mitt (Wheels/Tires)
EZ Wheel Brush
Poorboys Spray and Rinse (wheels)
Clay
ClayMagic
ONR
Paint Correction
1. HD Uno via PC, HD 5.5" orange pad.
2. Optimum Polish via Makita Rotary, LC 6.5" CCS black pad
LSP
Migliore Competizione
Wheels: Migliore Wheel Seal
Before:
HD Pad:
After:
Some micromarring left over, needed a finishing polish.
Rotary:
I broke out the Rotary, OP, and a black 6.5 LC pad from this point on.
Ahh, perfection.
50/50:
After:
Wash
Poorboys Slick and Suds - Foamed
Sheep Skin Wash Mitts (Paint)
Microfiber Wash Mitt (Wheels/Tires)
EZ Wheel Brush
Poorboys Spray and Rinse (wheels)
Clay
ClayMagic
ONR
Paint Correction
1. HD Uno via PC, HD 5.5" orange pad.
2. Optimum Polish via Makita Rotary, LC 6.5" CCS black pad
LSP
Migliore Competizione
Wheels: Migliore Wheel Seal
Before:
HD Pad:
After:
Some micromarring left over, needed a finishing polish.
Rotary:
I broke out the Rotary, OP, and a black 6.5 LC pad from this point on.
Ahh, perfection.
50/50:
After:
#2
Vendor - Former Vendor
Thread Starter
Join Date: Jan 2008
Location: Connecticut
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
Day 2.
I work up at the crack of dawn to get the detail done before the football games started. I knew I had a long day ahead of me.
Before:
After:
It's always important to brush your pad with a stiff brush in between panels to avoid dusting and the pad gumming up.
I work up at the crack of dawn to get the detail done before the football games started. I knew I had a long day ahead of me.
Before:
After:
It's always important to brush your pad with a stiff brush in between panels to avoid dusting and the pad gumming up.
#5
Vendor - Former Vendor
Thread Starter
Join Date: Jan 2008
Location: Connecticut
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
Thanks!
The paint was actually pretty good quality. It was painted in the MB factory so I figured it would be rock hard but, it's pretty soft.
The paint was actually pretty good quality. It was painted in the MB factory so I figured it would be rock hard but, it's pretty soft.
Thread
Thread Starter
Forum
Replies
Last Post