First time at track: Orlando speed-bithlow
Thread Starter
Registered User
iTrader: (3)
Joined: Sep 2008
Posts: 153
Likes: 0
From: Palm Coast/Daytona Beach, FL.
So I ran my 03" track for the first time...ehh I've got to get better at it...
R/T- .605
60'- 2.3
330- 6.3
1/8- 9.7
mph- 75
1000- 12.5
1/4- 14.9
mph-94
Pretty shitty launch, had it at like 4000 rpms and pretty much spun thru first. On Nitto street tires and lowered the pressure to 30. Second run was worse but got ancy at the line and just rev pissed it and couldn't stop spinning. Better luck next time I suppose.
R/T- .605
60'- 2.3
330- 6.3
1/8- 9.7
mph- 75
1000- 12.5
1/4- 14.9

mph-94
Pretty shitty launch, had it at like 4000 rpms and pretty much spun thru first. On Nitto street tires and lowered the pressure to 30. Second run was worse but got ancy at the line and just rev pissed it and couldn't stop spinning. Better luck next time I suppose.
dude...is your track at an elevation or something?
It's awfully hard to run close to 15 sec times in a Z.
Even with VDC on I still ran 14.6 in my heavy *** touring Z. I don't know what you're doing but obviously you have a lot to learn. lol
It's awfully hard to run close to 15 sec times in a Z.
Even with VDC on I still ran 14.6 in my heavy *** touring Z. I don't know what you're doing but obviously you have a lot to learn. lol
when is the next time you are going? i will meet up with you at the track and try to give you some tips. when they actually do prep there track i can cut low 2.0 60". i am not good at giving tips threw typing. so i am not going to try
Thread Starter
Registered User
iTrader: (3)
Joined: Sep 2008
Posts: 153
Likes: 0
From: Palm Coast/Daytona Beach, FL.
Yea that was my mistake dumping the clutch. Just got ancy and dumped it. But Ill get it better and def let you guys know thanks.
I will be probably going there soon-been trying to get Jetpilot to go to-
curious what his 700 hp beast can do-we were supposed to go last
Friday to Bithlow but complications came up in his schedule and i did
not feel like going by myself.
I have run there about 7-8 different days and about 4-5 passes each
time with my Z. The launch is important at that track, have to get tires
warmed up well and pressures at about 26psi-each shift needs to be at
optimum power levels with no bogging or overrevs.
My best there so far is 13.84 but hoping to be at 13.6-13.7 this time
have done some mods since then on my heavy-*** grand touring auto Z.
curious what his 700 hp beast can do-we were supposed to go last
Friday to Bithlow but complications came up in his schedule and i did
not feel like going by myself.
I have run there about 7-8 different days and about 4-5 passes each
time with my Z. The launch is important at that track, have to get tires
warmed up well and pressures at about 26psi-each shift needs to be at
optimum power levels with no bogging or overrevs.
My best there so far is 13.84 but hoping to be at 13.6-13.7 this time
have done some mods since then on my heavy-*** grand touring auto Z.
Trending Topics
i just checked the weather and it should be in the mid 50's that night so i will be there for sure. and night of fire is on saturday so the track should be nice a preped.
Last edited by blktrack350; Nov 21, 2008 at 02:57 PM.
Thread Starter
Registered User
iTrader: (3)
Joined: Sep 2008
Posts: 153
Likes: 0
From: Palm Coast/Daytona Beach, FL.
okay yea Ill make plans for it but def. catch me out there. cant miss the le mans z. But ill pm you prior.
I may make it out Wednesday night as well. The 240z is back on the road after it's latest round of upgrades (new EMS and turbo) and I want to put some tuning miles on it. I may try a pass or two on the street rubber (probably an exercise in futility), depending on the state of tune of the car.
Mike
Mike
Thread Starter
Registered User
iTrader: (3)
Joined: Sep 2008
Posts: 153
Likes: 0
From: Palm Coast/Daytona Beach, FL.
I may make it out Wednesday night as well. The 240z is back on the road after it's latest round of upgrades (new EMS and turbo) and I want to put some tuning miles on it. I may try a pass or two on the street rubber (probably an exercise in futility), depending on the state of tune of the car.
Mike
Mike
Registered User
iTrader: (13)
Joined: Jul 2007
Posts: 290
Likes: 0
From: Kissimmee & Ft. Lauderdale, FL
i will be out there wednesday night to. im getting another OEM clutch in tuesday because i burnt mine last time. im putting my test pipes on at the same time hoping to run 12s on a 100 shot
Thread Starter
Registered User
iTrader: (3)
Joined: Sep 2008
Posts: 153
Likes: 0
From: Palm Coast/Daytona Beach, FL.



