Notices
Engine & Drivetrain VQ Power and Delivery

Attention Everyone who has brought their car to Scott Performance!

Old Aug 11, 2006 | 04:45 AM
  #41  
Julian@MRC's Avatar
Julian@MRC
Banned
iTrader: (28)
 
Joined: Dec 2005
Posts: 5,510
Likes: 0
From: Spotswood NJ
Default

Originally Posted by Sharif@Forged
Yup, we gave up on trying to simulate DJ numbers. We run no additional correction, other than standard atmospheric correction (which every dyno uses). Our NA baseline cars usually pull about 210-215whp on our dyno, which is low, in comparison to a DJ. With our dyno charts, I can gaurantee you will have a higher number on a dynojet, and thats it!
The correction is close, in most cases..Most of my customers whohadprevious dyno jetsor postdyno jets came within a few hp difference either way..The bottom line is that if you gain power, regardless of the dyno it will be a % of your overall power output..I tend to discredit Dyna Packs as they are 90% of the time, ON CRACK..I guess SP's dyno is similar to a dyna pack...
On a side note Sharif, the #'s in your sig are still your old "corrected" numbers right?
Reply
Old Aug 11, 2006 | 07:17 AM
  #42  
Philthy's Avatar
Philthy
Boost Junkie
Premier Member
iTrader: (3)
 
Joined: Jun 2003
Posts: 2,018
Likes: 1
From: Centeral NJ
Default

Originally Posted by MRC Motorsports
I tend to discredit Dyna Packs as they are 90% of the time, ON CRACK..I guess SP's dyno is similar to a dyna pack...
Come on now - dyna packs are great dynos...
Reply
Old Aug 11, 2006 | 11:27 AM
  #43  
Sharif@Forged's Avatar
Sharif@Forged
Sponsor
Forged Performance
iTrader: (92)
 
Joined: Dec 2003
Posts: 13,733
Likes: 1
From: Marietta, GA
Default

The numbers in my sig are ancient...moving on to much bigger things. Stay tuned.

Oh, and why are you trying to aspire to emulate antiquated DJ technology? Go with the raw DD numbers...we need consistency. Most savy people know that DD reads lower than DJ.
Reply
Old Aug 12, 2006 | 02:35 AM
  #44  
G352NV's Avatar
G352NV
Registered User
iTrader: (13)
 
Joined: May 2004
Posts: 2,141
Likes: 0
From: Sac
Default

Hahaha looks like the other thread is gone. Its really fugged. I hope dude got his cash back to pull that thread.
Reply
Old Aug 12, 2006 | 09:50 AM
  #45  
chichi506's Avatar
chichi506
Thread Starter
New Member
20 Year Member
 
Joined: Mar 2004
Posts: 234
Likes: 0
From: San Bruno
Default

what happened to the other thread?
Reply
Old Aug 12, 2006 | 10:04 AM
  #46  
Julian@MRC's Avatar
Julian@MRC
Banned
iTrader: (28)
 
Joined: Dec 2005
Posts: 5,510
Likes: 0
From: Spotswood NJ
Default

Originally Posted by Sharif@Forged
The numbers in my sig are ancient...moving on to much bigger things. Stay tuned.

Oh, and why are you trying to aspire to emulate antiquated DJ technology? Go with the raw DD numbers...we need consistency. Most savy people know that DD reads lower than DJ.
Cause 90% of members on here automatically convert DD numbers to Dyno Jet numbers anyway, when I post DD uncorected #'s. So there really is no point, i used both and let them decide..
Reply
Old Aug 12, 2006 | 10:25 AM
  #47  
stereoneeds's Avatar
stereoneeds
New Member
iTrader: (2)
 
Joined: Sep 2005
Posts: 886
Likes: 0
From: san diego, ca
Default

Originally Posted by G352NV
Hahaha looks like the other thread is gone. Its really fugged. I hope dude got his cash back to pull that thread.
yeah i cant believe they closed the other thread. they didnt just lock it- its gone.
Reply
Old Aug 12, 2006 | 11:59 AM
  #48  
ZON's Avatar
ZON
Registered User
iTrader: (2)
 
Joined: May 2002
Posts: 2,059
Likes: 0
From: norcal
Default

God damn!!! I have no idea on what has been going on. WTF is going on with the SP/Ted thing??? Please fill in a guy stuck in Singapore. I haven't visited SP for a while now.
Reply
Old Aug 12, 2006 | 09:55 PM
  #49  
ZON's Avatar
ZON
Registered User
iTrader: (2)
 
Joined: May 2002
Posts: 2,059
Likes: 0
From: norcal
Default

Okay, I just got the low down on what went down with my friend, Alex. Alex I appologize for not knowing any of this. As you know since I just PM'ed you, you know where I stand. So I have some things to say to some people.

To Greg: I have been your friend since 1979. You know I have been loyal & have stood up for your business & all that history and all of that. I am still your friend, I hope, and I still am thrilled about that one night you called me up with that offer that I, damn right I did, jumped on. I will never forget it.
But now I am stuck, I just found out about my friends, Alex, experience with the new owner of SP. There has been other things I have heard about that I just shrugged off as ignorant customer, hot headed by nature or whatever, but Alex is my friend who I brought into SP and this is the treatment my friend gets? I know Alex and I know he is not telling distruths. It is not you, I know you had nothing to do with it, not you. In the grand scheme of things I am really just a nobody (not really though) and this is just a stupid car forum that just makes me dumber every time I come here. To sum up my feelings my friend got fuked over by someone who I thought was my friend and now I have no placed to take my Z to get stuff and get worked on. AND THAT'S FUKED UP!!!!! That's not to be directed towards you, Greg, no matter what you feel about me I will always be your friend. But i can't even go to ZCG because they must hate me and you would hate me if I did do that. I don't want to loose you as my friend, so you see, I am stuck.

To Laurie: I love you, nuff said!!

To Chris: Thank you for all of your hard work. My N/A set up screams, it really does. I am still your friend. If I can do anything for you just name it.

To Mario and Serg: You guys are right on and hard workers. I would trust you guys with my Z anyday. Good luck to you both, sincerely.



Mike, just a humble 350Z owner.
original my350Z.com member #7

good bye.

Last edited by ZON; Aug 13, 2006 at 04:37 PM.
Reply
Old Aug 12, 2006 | 10:02 PM
  #50  
ZON's Avatar
ZON
Registered User
iTrader: (2)
 
Joined: May 2002
Posts: 2,059
Likes: 0
From: norcal
Default

Okay now I just got it straight from my friend.

edit: and just edited out my response to that. it was too harsh and I don't want to get myself into any legal trouble.

Last edited by ZON; Aug 12, 2006 at 10:32 PM.
Reply
Old Aug 12, 2006 | 10:08 PM
  #51  
VN_350z's Avatar
VN_350z
Banned
iTrader: (3)
 
Joined: Jan 2006
Posts: 2,585
Likes: 0
From: Orange County
Default

Originally Posted by ZON
When you *** my friend you *** me. AHHHHHHHHHHHH
That's why it's good to get some vasceline. I hope you can walk normally.
Reply
Old Aug 12, 2006 | 10:30 PM
  #52  
ZON's Avatar
ZON
Registered User
iTrader: (2)
 
Joined: May 2002
Posts: 2,059
Likes: 0
From: norcal
Default

^^ Oh please, go find something else to do.
Reply
Old Aug 12, 2006 | 10:36 PM
  #53  
Bubble's Avatar
Bubble
-REPLICA ARMY-
Premier Member
iTrader: (50)
 
Joined: Oct 2004
Posts: 10,067
Likes: 1
From: Yorba Linda, CA
Default

I have no placed to take my Z to get stuff and get worked on. AND THAT'S FUKED UP!!!!! That's not to be directed towards you, Greg, no matter what you feel about me I will always be your friend. But i can't even go to ZCG because they must hate me and you would hate me if I did do that.
lolz
Reply
Old Aug 12, 2006 | 10:39 PM
  #54  
G352NV's Avatar
G352NV
Registered User
iTrader: (13)
 
Joined: May 2004
Posts: 2,141
Likes: 0
From: Sac
Default

Wow it took this for you to see the light!
Reply
Old Aug 12, 2006 | 10:45 PM
  #55  
ZON's Avatar
ZON
Registered User
iTrader: (2)
 
Joined: May 2002
Posts: 2,059
Likes: 0
From: norcal
Default

Everyone else is cool with me. But the other guy.....yes I guess this is what it took, what can I say.
well I am sorry that you were not pleased either, Steve.
Reply
Old Aug 12, 2006 | 10:47 PM
  #56  
ZON's Avatar
ZON
Registered User
iTrader: (2)
 
Joined: May 2002
Posts: 2,059
Likes: 0
From: norcal
Default

Originally Posted by Bubble
lolz
I know Bubble, that's too funny I guess.
Reply
Old Aug 12, 2006 | 11:45 PM
  #57  
Bubble's Avatar
Bubble
-REPLICA ARMY-
Premier Member
iTrader: (50)
 
Joined: Oct 2004
Posts: 10,067
Likes: 1
From: Yorba Linda, CA
Default

Originally Posted by ZON
I know Bubble, that's too funny I guess.
ROB will be very busy with new customer from SP so he will not remember who you're anyway.
Reply
Old Aug 13, 2006 | 12:01 AM
  #58  
ZON's Avatar
ZON
Registered User
iTrader: (2)
 
Joined: May 2002
Posts: 2,059
Likes: 0
From: norcal
Default

HAHA!! That's funny. But, eh, yes he knows me all too well and besides, I would loose my long time friend, if I have not just now lost him already. Long story...Rob knows.

Hi Rob
Reply
Old Aug 13, 2006 | 11:45 AM
  #59  
bigbri's Avatar
bigbri
Registered User
 
Joined: Apr 2005
Posts: 2,059
Likes: 0
From: CALI
Default

This makes me glad that my z is being sold and I don't have to deal with this bs anymore....look for my tailights in a new fully built N/A 07z06 with over 600all motor whp.. I'll keep in touch...

Last edited by bigbri; Aug 13, 2006 at 05:40 PM.
Reply
Old Aug 13, 2006 | 01:00 PM
  #60  
dbmtrx123's Avatar
dbmtrx123
Registered User
iTrader: (1)
 
Joined: Sep 2005
Posts: 160
Likes: 0
From: Bellevue, NE
Default

I'm sorry someone got screwed, but this is just too much drama.
Reply

Thread Tools
Search this Thread

All times are GMT -8. The time now is 08:01 AM.